Products  |  Engineering Mechanics and Machine Elements  |  Strength of Materials
> All Products
> Elastic Deformations
> Buckling and Stability
> Compound Stress
> Stress and Strain Analysis
WP 950
Deformation of Straight Beams
Elastic lines of statically determinate and indeterminate beams under various clamping conditions

SE 110.47
Methods to Determine the Elastic Line
Determination of elastic lines of a beam under load using the principle of virtual work and Mohr's Analogy

SE 110.29
Torsion of Bars
Investigation of elastic torsion of bars with open and closed cross-section

WP 100
Deformation of Bars under Bending or Torsion 
Influence of material, cross-section and clamping length on deformation

SE 110.20
Deformation of Frames 
Elastic deformation of a statically determinate and indeterminate frames under point load

FL 170
Deformation of Curved-Axis Beams 
Principle of virtual forces for calculating deformation

SE 110.44
Deformation of Trusses
Application of Castigliano’s first theorem

TM 400
Hooke’s Law
Elastic behaviour of tension springs under load

SE 110.19
Investigation of Simple Stability Problems
Determination of the buckling load under different conditions

SE 112
Mounting Frame
Base unit for clear and simple set-up of experiments on statics, strength of materials and dynamics

WP 121
Demonstration of Euler Buckling
Test bars made of spring steel

WP 120
Buckling Behaviour of Bars
Verification of the Euler Theory of buckling

FL 160
Unsymmetrical Bending
Symmetrical and unsymmetrical cross-sectional profiles: I, L and U

WP 130
Verification of Stress Hypotheses
Multi-axial loading of test specimens by pure bending, pure torsion or a combination of the two

FL 100
Strain Gauge Training System
Basic introduction to measurement with strain gauges

FL 102
Determining the Gauge Factor of Strain Gauges
Measurement of deflection and strain

FL 101
Strain Gauge Application Set 
Wiring and connecting up strain gauges

FL 151
Multi-Channel Measurement Amplifier
Processing of analogue strain gauge measuring signals for FL 120 - FL 140 and for GUNT trusses

FL 120
Stress and Strain Analysis on a Membrane
Deflection and strain of a membrane under internal pressure; membrane with strain gauge application

FL 130
Stress and Strain Analysis on a Thin-Walled Cylinder
Determination of axial and circumferential stress from measured strains; cylinder with strain gauge application as vessel

FL 140
Stress and Strain Analysis on a Thick-Walled Cylinder
Triaxial stress state in cylinder wall; cylinder with strain gauge application on surface and in wall

FL 200
Photoelastic Experiments with a Transmission Polariscope
Creation of stress patterns with plane or circular polarised light

FL 210
Photoelastic Demonstration
8 polycarbonate models as typical components

© 2005 G.U.N.T. Gerätebau GmbH