Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Statics  |  WP 962
WP 962 Beam on Two Supports: Bending Moment Diagram Show data sheet (pdf file) Print page
Beam on Two Supports: Bending Moment Diagram
Technical Description

WP 962 consists of a beam mounted on two supports which is subjected to point loads. The beam is cut at one point. At that point there is a low-friction hinge with one degree of freedom. The bending moment occurring at the section is recorded by a force gauge acting on a fixed lever arm. An adjuster nut on the force gauge is used to align the beam horizontally and balance out any lowering.
  The reactions are determined from the static conditions of equilibrium. To investigate the effect of the point loads in the beam, it is notionally split into two segments. Applying the method of sections, the internal forces and moments are plotted onto the two segments and calculated by way of conditions of equilibrium.

Learning Objectives / Experiments
- Calculation of the reactions arising from the static conditions of
- Application of the method of sections to calculate the internal
  * under a point load 
  * under multiple point loads
- Calculation of the bending moment curve 
- Comparison of calculated and measured bending moment values
* Application of the method of sections to determine
  the bending moment
Available accessories
WP 300.09 -- Laboratory Trolley
Alternative products
WP 960 -- Beam on 2 Supports: Shear Force & Bending Moment Diagrams
[1] Investigation of bending moment on beam mounted on 2 supports
[2] Indication of bending moment in beam by low-friction hinge with 1 degree of freedom
[3] Position of hinge at 1/3 span
[4] 2 bearing supports 
[5] Loading of beam by 1 to 3 point loads
[6] Force gauge and lever arm to indicate bending moment
[7] Adjuster nut for horizontal alignment of beam
[8] Storage system to house the components
Technical Data
- total length: 1000mm, span: 800mm
Bending moment measuring range: -10...+10Nm
Weight set
- 3x 1N (hangers), 12x 1N, 9x 5N
- max. weight load per hanger: 20N
Dimensions and Weight
l x w x h: 1400 x 320 x 600 mm
Weight: approx. 35 kg
Scope of Delivery
1 experimental unit, 3 sets of weights, 1 steel rule, 1 storage system, 1 set of instructional material
Order Details
020.96200  WP 962  Beam on Two Supports:
                     Bending Moment Diagram
© 2005 G.U.N.T. Gerätebau GmbH