Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Fundamentals of Engineering Design  |  TM 260
TM 260 Tribology Trainer Basic Module Show data sheet (pdf file) Print page
Technical Description
The trainer enables different sliding and rolling friction cases to be investigated. The parameters of a tribological system can be assessed during this process. The drive module is the basis for experiments with a range of accessories. The unit consists of a sturdy frame made of anodised aluminium section. Rubber feet ensure that the table unit does not slip. The individual accessory modules are driven using a DC drive motor. The motor is connected to the controller. The rotational speed can be continuously and finely adjusted using a 10-turn potentiometer. The speed is regulated electronically and displayed digitally. Friction forces are measured using strain gauge transducers. The controller processes this data and displays it digitally. Snap-action fasteners for fixing the accessory modules to the frame simplify the rapid assembly and disassembly of the experiments.  
Learning Objectives / Experiments

The following experiments can be performed with the basic module when fitted with the appropriate accessory:
- Combined rolling and sliding friction of two discs

  with slip
- Elastohydrodynamic behaviour, EHD, rolling friction

  of a spherical object against a flat surface
- Abrasion testing: pin against a disc
- Abrasion testing: abrasive disc experiment
- Friction vibration and "stick-slip" effects
- Distribution of pressure in plain bearings

Features

* Drive module for investigating various sliding and

  rolling friction cases1
* Electronic measurement of the contact pressure

  between the friction materials using strain gauges1
* Modular overall concept

Available accessories
TM 260.01 -- Experimental Module Rolling / Sliding Disc
TM 260.02 -- Experimental Module Optical Elastohydrodynamics
TM 260.03 -- Experimental Module Pin on Disc
TM 260.04 -- Experimental Module Slip / Stick & Friction Vibration
TM 260.05 -- Experimental Module Block on Ring Friction
TM 260.06 -- Experimental Module Journal Bearing Pressure Distribution
Specification

[1] Basic module for experiments on tribological systems
[2] Base frame made of anodised aluminium profile
[3] Modular layout as table unit
[4] Rapid assembly due to special fasteners
[5] Swivelling drive consisting of DC motor and worm drive 15:1
[6] Operating speed: 0...200rpm, continuous, electronically controlled, 8-digit speed display
[7] Force measurement using strain gauges, 0...50N, 3-digit digital display
[8] Incremental encoder: number of pulses 6/360
[9] Control housing l x w x h 370x270x190mm
[10] l x w x h 500x450x200mm

 

Technical Data

DC motor

- supply: 24V
- nominal speed: 3000rpm
- torque: 18.5Nm
Worm drive: ratio 15:1
Operating speed: 0 ... 200rpm, electronically controlled
Speed display, 8-digit
Incremental encoder: number of pulses 6/360
Force measurement using strain gauges, 0...50N, display 3-digit, digital

 

Dimensions and Weight

l x w x h : 500 x 450 x 200 mm
Weight : approx. 16 kg

l x w x h : 370 x 270 x 190 mm (control housing)

Required for Operation
230V , ~50Hz
Scope of Delivery

1 base frame

1 motor with gearbox
1 controller

1 instruction manual

Order Details

040.26000  TM 260  Tribology Trainer Basic

                     Module


Print
© 2005 G.U.N.T. Gerätebau GmbH