Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Components and Calibration  |  RT 370
RT 370 Setup of Field Bus Systems Show data sheet (pdf file) Print page
Technical Description

  Field bus technology plays a key role in modern-day process automation. The field bus permits networking of terminal devices such as controllers, sensors or actuators in the plant system (field level) with the higher-level control room (control level). A network of this kind can be quite extensive; line lengths of as much as 1000 metres and more are possible.


  This experimental unit is used to teach the initial basic steps in field bus technology based on the example of Profibus DP. Various terminal devices (slaves) are activated and read by a PC with a Profibus DP interface (master). The required hardware is largely pre-configured. Students are able to concentrate on the software programming of the field bus system. The following specific topics can be covered: System configurator with DMF (Device Master File), bus topology, communication protocols, tags, OPC (OLE for Process Control) server, input and output of process data, and much more.

  The experimental unit includes a digital controller as well as analogue and digital input and output modules with a Profibus DP interface. Two potentiometers permit the simulation of input signals for the controllers. A digital voltmeter displays the output signals. Digital signals are generated by switches and displayed by LEDs. The controlled variable, manipulating variable and reference variable data are delivered as standard signals at lab jacks, enabling the controllers to be incorporated into real processes at any time.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments

- function and programming of a field bus system
  * defining the bus topology with the stations
  * writing the communication protocols
  * familiarisation with the device master file
  * familiarisation with the OPC server
  * defining tags
  * accessing the OPC database from a process

    control program
- familiarisation with the field bus stations  
  * function of a digital process controller
  * function of an analogue input / output module
  * function of a digital input / output module

* Profibus DP field bus system1
* Networking of field bus modules1
* Communication protocols1
* Recording digital and analogue signals
Alternative products
IA 130 -- PLC Module
IA 520 -- Computer Integrated Manufacturing and Handling System
RT 350 -- Operation of Industrial Controllers
RT 360 -- Networking of Industrial Controllers
RT 380 -- Optimization of Control Loops
RT 350 - RT 380 Trainers for Process Automation

[1] experimental unit for field bus systems
[2] digital controller, configurable as a P, PI or PID controller with Profibus DP interface
[3] analogue Profibus DP I module
[4] analogue Profibus DP O module
[5] digital Profibus DP IO module
[6] signal generator
[7] digital voltmeter

[8] Profibus DP interface card for PC
[9] OPC server and GUNT process control software
[10] all process variables accessible as analogue signals at lab jacks 0...10V

Technical Data

- configurable as P, PI or PID controller
- proportional gain Xp: 0...999,9%
- integral action time Tn: 0...3.600s

- derivative time Tv: 0...1.200s
Signal generator: 0...10V
Digital voltmeter: 0...20V
Process variables as analogue signals: 0...10V
4 analogue inputs: 0...10V
2 analogue outputs: 0...10V
4 digital inputs, 4 digital outputs
Connection of external instruments (e.g. oscilloscope, line recorder) via lab jacks

System requirements: Windows XP or Windows Vista


Dimensions and Weight
LxWxH: 480x450x150mm
Weight: approx. 10kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery

1 experimental unit
1 interface card
1 software CD with driver software, system

   configuration program, OPC server and GUNT

   process control software
1 set of cables
1 set of instructional material

Order Details

080.37000  RT 370  Setup of Field Bus Systems

© 2005 G.U.N.T. Gerätebau GmbH