Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Biological Process Engineering  |  CE 640
CE 640 Biotechnical Production of Ethanol Show data sheet (pdf file) Print page
CE 640 - A product from the GUNT 2E range
Technical Description

  As well as its great importance for the chemical and foodstuffs industries, ethanol (alcohol) is increasingly used as a fuel. The CE 640 can be used to conduct realistic experiments for the production of ethanol from starch-based raw materials such as potatoes. The experimental plant consists of three main components: a mash tank, a fermentation tank and a distillation unit.
  A mixture of water, finely chopped potatoes and alpha-amylase (enzyme) is filled into the mash tank. To dissolve the tightly packed starch chains in the potatoes, heating steam is injected into the mixture via a nozzle (gelatinisation). This increases the flow resistance of the mash, which would prevent further processes. The alpha-amylase breaks up the starch chains (liquefying) thereby reducing the flow resistance. Gluco-amylase is used to convert the starch into sugar (saccharification). This enzyme requires lower temperatures and pH values. The temperature is reduced using the water cooling jacket around the mash tank, the pH value is adjusted by the addition of acid and caustic. After saccharification the mash is pumped into the fermentation tank. During the fermentation process in this tank, ethanol is produced. A water cooling system controls the temperature. After the fermentation process, the mash is pumped into the distillation unit. This is equipped with a bubble tray column for separation of the ethanol. Two tanks are available, one for the spent mash, the other for the distilled ethanol.

  The experimental plant has comprehensive measurement, control and operating functions, which are controlled via a PLC. A touch screen displays measured values and permits the operation of the system.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments

- familiarization with the necessary individual steps

  and system components for production of ethanol:
  * gelatinisation by steam injection
  * liquefaction by use of alpha-amylase
  * saccharification by use of gluco-amylase
  * fermentation: conversion of sugar into ethanol by

     yeast cultures under anaerobic conditions
  * distillation: separation of ethanol from the mash


* Practical process for production of ethanol from

  starch-based biological raw materials1
* System control using a PLC, touch screen for

  display and operation1
* PC aided data acquisition via USB interface

Available accessories
CE 715.01 -- Electrical Steam Generator 10kW
Alternative products
CE 600 -- Continuous Rectification
CE 602 -- Discontinuous Rectification
CE 640 Biotechnical Production of Ethanol

[1] batch conversion of starch-based raw materials into ethanol
[2] open mash tank with water-jacket cooling, steam injection and stirrer
[3] closed fermentation tank with stirrer and water-jacket cooling/heating
[4] distillation unit with 3 bubble trays, dephlegmator, condenser and stirrer
[5] 2 pumps for delivering the mash
[6] pH value control in the mash tank with acid and caustic delivered by metering pumps

[7] adjustment of the amount of injected heating steam, the cooling water flow rates and the head temperature by means of PID controllers
[8] system control using a PLC; operated by touch screen

[9] LabVIEW software for data acquisition via USB under Windows XP or Windows Vista

Technical Data

- mash tank: approx. 40L

- fermentation tank: approx. 50L

- sump distillation unit: approx. 45L
- product tank: 10L
- spent mash (removable): 30L
Distillation unit
- column: DxH: approx. 220x1.200mm
- sump heater: 0...7.500W
2 pumps driven by compressed air
- max. head (2 bar drive pressure): 20m
- max. flow rate (2 bar drive pressure): 15L/min
- max. solid lump size: 4mm
2 metering pumps (acid and caustic)
- max. head: each 160m
- max. flow rate: each 2,1L/h
Measuring ranges
- temperature sensors: 10x 0...150C
- water quantity mash tank: 0...20L

- pH value: 2...10

- pressure heating steam: 0...10bar

Dimensions and Weight

LxWxH: 3.500x1.200x2.000mm

Weight: approx. 500kg

Required for Operation
400V, 50Hz, 3 phase or 230V, 60Hz, 3 phase; compressed air 1,5...6bar; cooling water: min. 400L/h; steam 15kg/h at pmin: 3bar; heating water: min. 400L/h, 40C
Scope of Delivery

1 experimental plant, 1 set of enzymes etc.

1 areometer, 1 set of hoses, 1 pipette

1 set of beakers, bucket, shovel

1 software CD with cable
1 set of instructional material

Order Details

083.64000  CE 640  Biotechnical Production of  


© 2005 G.U.N.T. Gerätebau GmbH