Home           Products           Company           Contact us     
> Engineering Drawing
> Cutaway Models
> Dimensional Metrology
> Fasteners and Machine Parts
> Manufacturing Engineering
> Assembly Projects
> Maintenance
> Machinery Diagnosis
> Automation
Products  |  Mechatronics  |  Fasteners and Machine Parts  |  MG 200
MG 200 Instructional Kit: Threaded Fasteners and Lock Washers Show data sheet (pdf file) Print page
Technical Description

  This training kit provides the necessary material for joining workpieces with threaded joints. In the process, specific influencing factors (e.g. type of bolt locking, bolt length) can be analysed independently of each other. Bolt tightening and breakaway torques are measured using a torque wrench. The workpieces are held securely in a vice during the experiments.
  The material, including the torque wrench, is clearly laid out on a plastic tray. The well-structured instructional material outlines all the necessary technical information and provides a step-by-step guide through the exercises.


Learning Objectives / Experiments

- tightening a threaded joint to a preset torque
- measuring the breakaway torque as a function of the bolt length,

  property class, bolt locking type and tightening torque
- familiarisation with the relevant standard designations and terms,

  including graphical representation


* Practical workshop training relating to threaded

* Familiarisation with the key influencing factors

Alternative products
MG 100 -- Instructional Kit: Assembly with Dowel Pins
MG 110 -- Instructional Kit: Assembly with Keys
MG 120 -- Instructional Kit: Assembly with Taper Keys
MG 901 -- Nuts and Bolts Kit
MG 903 -- Screw-Locking Devices Kit
MG 905 -- Thread Types Kit
MG 911 -- Roller Bearings Kit

[1] set of material for workshop exercises relating to threaded joints
[2] brace with drill holes, 5 flat bars
[3] bolts to ISO 4014 and ISO 4017
[4] nuts to ISO 4032 and ISO 7040
[5] measurement of the tightening torque using a torque wrench with dial indicator

[6] all parts clearly laid out on a tray
[7] multiple trays stackable


Technical Data

Bolts M10
- property classes 5.6 and 8.8
- lengths: 35, 55, 75mm
Nuts M10, some self-locking
Various bolt locks, spring ring, toothed washer, strain washer
Torque wrench: 0...50Nm
Joined workpieces (flat bar and brace) made from steel, some with gunmetal finish


Dimensions and Weight
LxWxH: 500x350x110mm (tray)
Weight: approx. 9kg
Scope of Delivery
1 complete set of material, laid out on a tray
1 set of instructional material
Order Details

053.20000  MG 200  Instructional Kit: Threaded

                                 Fasteners and Lock Washers

© 2005 G.U.N.T. Gerätebau GmbH