Home           Products           Company           Contact us     
> Engineering Drawing
> Cutaway Models
> Dimensional Metrology
> Fasteners and Machine Parts
> Manufacturing Engineering
> Assembly Projects
> Maintenance
> Machinery Diagnosis
> Automation
Products  |  Mechatronics  |  Assembly Projects  |  MT 140
MT 140 Assembly Station: Piston Compressor Show data sheet (pdf file) Print page
Technical Description

  Compressors are at the core of compressed air generator plants. These plants are used where compressed air is used as a source of energy. Compressed air is often used instead of electrical energy, particularly in workplaces where there is a risk of explosion of combustible gases. The heat generated by compression is dissipated by cooling fins. The compressor is driven by a V-belt.
  The mobile workstation MT 140 forms part of the GUNT assembly, maintenance and repair practice line designed for training at technical colleges and in company training centres. The station includes everything required to provide students with an introduction to a wide range of demanding assembly projects. A disassembled piston compressor is contained in the drawers of the trolley cabinet which also holds the tools and assembly aids, small parts and gaskets required for assembly. A second fully functional compressor, permanently mounted to the workbench, can be used for demonstration purposes. This enables references to be made between individual components and the

complete assembled system at any time during teaching.


  Large-format drawings suitable for workshop practice can be attached to the display board at the rear of the trolley. All steps involved can be demonstrated to, and then performed by, the students. The comprehensive and clearly structured instructional material, including a set of drawings, sets out the individual steps in detail. It also provides additional information on the areas of application, mode of operation and design of the assemblies.
  The MT 140.01 test stand is required for functional testing after assembly is complete. Multimedia learning software MT 140.20 is also available.

Learning Objectives / Experiments

- Design and function of a compressor
- Reading and understanding engineering drawings
- Familiarisation with components and assemblies,

  their design features and functions
- Dimensioning exercises, gauging parts
- Work planning, in particular planning and

  presentation of the assembly process
- Familiarisation with assembly aids and jigs
- Assembly exercises: assembly of modules and

  complete units
- Analysis of faults and damage, in conjunction with

  maintenance and repair steps
- Material selection criteria


* Fully equipped mobile teaching station for

  demonstration purposes. Provides an introduction to

  assembly techniques using a piston compressor as

  an example1
* Comprehensive and well-structured instructional

* Learning in a practical environment1
* Highly suitable for developing interdisciplinary

  technical understanding

Available accessories
MT 140.01 -- Assembly Exercise Piston Compressor: Functional Test
MT 140.10 -- Cutaway Model Piston Compressor
MT 140.20 -- Multimedia Learning Software: Piston Compressor
Alternative products
MT 110 -- Assembly Station: Spur Wheel / Worm Gear Mechanism
MT 140.02 -- Assembly Exercise: Piston Compressor
MT 152 -- Assembly Exercise: Spur Gear
MT 190 -- Assembly Project: Materials Tester
MT 210 -- Assembly & Maintenance Exercise: Refrigeration

[1] Assembly project for engineering training
[2] 2 piston compressors: 1x set of components for assembly, 1x assembled, mounted on trolley as demonstrator
[3] Single-stage compressor, air-cooled, with fan flywheel, intake filter and pipe unions
[4] Compressor consisting of piston and cylinder, housing, driving gear, cylinder cover with valves
[5] Workshop trolley with rear drawing display board, built-under cabinet with 3 lockable drawers and vice with 115mm jaw width
[6] Assembly kit, tool kit, assembly aids, accessories and gaskets as well as instructional material contained in built-under cabinet
[7] The assembly station forms part of the GUNT assembly, maintenance and repair practice line


Technical Data

Air-cooled single-cylinder piston compressor
- cylinder bore: 50mm
- stroke: 32mm
- displacement volume: 63cm³
- speed: 1850min-1
- max. pressure: 10bar
- intake capacity: 115L/min
- drive power output: 700W
- dimensions, assembled: l x w x h: 223x256x314mm


Dimensions and Weight

l x w x h: 1520x795x1850mm (trolley)
Weight: approx. 150kg

Scope of Delivery

1 workshop trolley with rear drawing display board

   and built-under cabinet
1 working piston compressor
1 compressor in parts
1 set of assembly tools and jigs
1 set of small parts and gaskets
1 set of instructional material, consisting of
- technical description of system, complete set of

  drawings with individual parts and parts list,

  description of assembly and disassembly

  sequences, set of transparencies for overhead


Order Details

051.14000  MT 140  Assembly Station:

                                 Piston Compressor

© 2005 G.U.N.T. Gerätebau GmbH