Home           Products           Company           Contact us     
> Engineering Drawing
> Cutaway Models
> Dimensional Metrology
> Fasteners and Machine Parts
> Manufacturing Engineering
> Assembly Projects
> Maintenance
> Machinery Diagnosis
> Automation
Products  |  Mechatronics  |  Automation  |  RT 770
RT 770 Training System: Pneumatics, Electro-Pneumatics and PLC Show data sheet (pdf file) Print page
Technical Description

  The RT 770 is a fully equipped training system with all necessary components and aids to conduct a comprehensive training course in the fundamentals of pneumatic and electro-pneumatic controls. The didactic structure of the course is based on the long-established BIBB training concept. In addition to the BIBB course experiments, RT 770 also includes a PLC (programmable logic controller).
  The system comprises standard industrial components. The board-mounted components are securely attached to the assembly panels by a special quick-clamping system. The assembly area consists of two panels that are arranged in a roof-like configuration and can be used simultaneously. Pneumatic and electro-pneumatic circuits are constructed with the aid of pneumatic hoses and laboratory cables. A miniature compressor supplies the experiments with compressed air.

The sturdy trolley provides clearly laid out storage for the components.

  An extensive package of literature and media is supplied.

 

Learning Objectives / Experiments

- Physical principles of pneumatics and

  electro-pneumatics
- Fundamentals of, and terms used in, process

  control
- Design and function of pneumatic components
- Logic elements, logic diagram
- Multi-way valves, pressure, shut-off and flow control

  valves
- Controls with starting and set-up conditions

  (automatic/manual/jog mode)
- Controls with boundary conditions
- Routing and time controls (process and time

  controlled sequencers)
- Position-dependent controls
- PLC: counter function, shift register, sequencers
- Troubleshooting and commissioning

Features

* Complete training system providing an experimental

  introduction to the fundamentals of pneumatics and

  electro-pneumatics - with PLC1
* Experiment scope and configuration based on the

  tried and proven concept course developed by the

  Bundesinstitut für Berufsbildung (BIBB; Federal

  Institute for Vocational Training)1
* 2 large-format metal assembly panels for fast,

  secure component mounting1
* Sturdy base construction, mobile, with drawer

  system for storage

Specification

[1] Comprehensive trainer for demonstration and exercises in pneumatics, electro-pneumatics and PLCs
[2] 2 perforated metal panels for quick component fixing
[3] Standard industrial pneumatic and electro-pneumatic components
[4] Various multi-way valves, pressure, shut-off and flow control valves
[5] Electric limit switch, various proximity switches, solenoid valves, signal board
[6] PLC with programming software
[7] Integrated power supply unit to supply the electro-pneumatics and the PLC
[8] 2x maintenance units + distributor block for simultaneous use of both panels
[9] Hoses, cables and tools to construct the experiments
[10] Miniature compressor for compressed air supply
 

Technical Data

2 assembly panels, l x h: 1100x700mm each
Compressor
- tank: 25L
- intake capacity: 50L/min
- power output: 32L/min at 8bar
- max. pressure: 8bar
- motor: 0,34kW
PLC
- inputs: 9
- outputs: 7
- program memory: 1012 instructions, EEPROM

- programming software under Windows XP or

  Windows Vista
Size of components: nominal width 3
Pneumatic hose: 4/2mm
Power supply unit: 24VDC, 4A

 

Dimensions and Weight
l x w x h: 1530x750x1600mm
Weight: approx. 160kg
Required for Operation
230V, 50Hz, 1 phase or 120V, 60Hz, 1 phase
Scope of Delivery
1 training system, complete
1 miniature compressor
1 PLC with software
1 set of instructional material
Order Details

080.77000  RT 770  Training System: Pneumatics,

                                 Electro-Pneumatics and PLC


Print
© 2005 G.U.N.T. Gerätebau GmbH