Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Heating and Ventilation in Buildings  |  HL 107
HL 107 Circulating Pumps Training Panel Show data sheet (pdf file) Print page
Technical Description

The trainer contains a pipe system with two circulating pumps. It is possible to switch between series and parallel operation using ball valves.

  Two rotameters with different measuring ranges are provided for the measurement of the flow rate. Manometers indicate the pressure at all relevant points in the system. The temperature can be read on a bimetallic thermometer.

  The trainer has a closed water circuit with expansion vessel and is thus independent of the water mains.

Learning Objectives / Experiments

- Pump characteristics at varying speeds
- Determination of pipework characteristics
  and operating points
- Series operation of circulating pumps
- Parallel operation of circulating pumps
- Comparison of experiment and calculation


In conjunction with other training panels in the HL 100 series, it is possible to set-up a complete heating system.


* Trainer on heating systems and plumbing1
* Function of circulating pumps, series and parallel

* In conjunction with other trainers in the

  HL 100 series, assembly of a complete heating

  system is possible

Alternative products
HL 210 -- Losses in Pipe Systems and Fittings
HL 630 -- Efficiency in Heating Technology
HM 300 -- Basic Centrifugal Pump
[1] Series and parallel operation of 2 pumps
[2] Training panel can be changed to various operating modes using ball valves
[3] 2 rotameters
[4] Pressure measurement with 6 Bourdon tube manometers
[5] 1 bimetallic dial thermometer
[6] Water connections made using quick-release couplings
Technical Data

2 pumps

- power consumption: 70W

- max. flow rate: 60L/min

- max. head: 4m

Measuring ranges
- flow rate 1x 150...1600L/h / 1x 400...4000L/h
- temperature: 0...60C
- pressure: 0...2.5bar


Dimensions and Weight
l x w x h: 1650 x 200 x 1100 mm (panel)
Weight: approx. 58 kg (panel)
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phasse
Scope of Delivery

1 trainer

1 manual

Order Details

065.10700  HL 107  Circulating Pumps Training


© 2005 G.U.N.T. Gerätebau GmbH