The experiments are performed with air. A compressed air connection with reservoir and pressure reducing valve are included on the panel.
The trainer has two pipe circuits that can be individually selected. Various leaks can be simulated in one gas line. The other line represents a normal gas supply pipe. A gas meter is fitted in each line. Typical industrial components are used.
Leak detection and installation work can be performed on gas pipes by the trainee.
Learning Objectives / Experiments
- Simulation of different leaks - Demonstration of leak detection - Working on gas pipes - Testing before and after gas connection in
accordance with regulations
* Exercises on gas pipes1
* Simulation of leaks in pipes
 Exercises on gas pipes  2 individually selectable pipe sections  1 gas meter with 1 connection
 1 gas meter with 2 connections  1 pipe section for finding leaks  1 pipe section as supply pipe with gas socket and gas connection with ball valve
Air pressure controller
- max. inlet pressure: 21bar
- outlet pressure: 0.01...0.6bar Gas pressure controller