Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Strength of Materials  |  FL 210
FL 210 Photoelastic Demonstration Show data sheet (pdf file) Print page
Technical Description

Photoelasticity can be used to demonstrate distribution of stress and stress concentrations in component models. Using polarised light, the distribution of stress in flat, transparent bodies (plastic models) is investigated. Polarisation filters represent the distribution of stress in colours. The notching and point loading and the criteria dictating component design are clearly visualised.

  FL 210 is portable to use with overhead projectors. Various models made of transparent plastic are mounted in a frame. A load application device is used to apply compressive or tensile loads to the model under investigation by means of a spindle.

  An arrangement of polarisation filters and quarter wave filters generates optionally plane or circular polarised light. A green filter is supplied as part of the package to generate monochromatic light. The light source is an overhead projector (e.g. FL 210.01). The use of monochromatic light produces a system of dark and light stripes providing indications of the distribution and magnitude of mechanical stresses. The supplied models represent typical examples, permitting experimentation in relation to notching and point loading. The distribution of stress shown in the model is identical to that in the actual part under design.

  Additional models are also available to represent distribution of stresses in bolted connections, roller bearings, wrenches and tooth profiles.
  All the component elements of the experiment are clearly laid-out and housed securely in a box.


  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Learning Objectives / Experiments

- Generation of planar stress states in various

  models under load
  * compressive load
  * tensile load
- Investigation of distribution of stresses with plane or

  circular polarised light
- Interpretation of photoelastic fringe patterns
  * distribution of stress
  * stress concentration


* Representation of distribution of stress in

  component models with the aid of photoelasticity1
* Demonstration unit as mounting for overhead

* Generation of stress patterns with plane or

  circular polarised light1
* Identification of stress concentrations1
* Green filter for monochromatic illumination1
* 8 polycarbonate models as typical components1
* Additional models available as accessories

Available accessories
FL 210.01 -- Overhead Projector
FL 210.10 -- Model - Bolted Connection
FL 210.11 -- Model - Rolling Bearing
FL 210.12 -- Model - Wrench
FL 210.13 -- Model - Pinion
Alternative products
FL 200 -- Photoelastic Experiments with a Transmission Polariscope
FL 200 - FL 210 Representation of Stress Distribution
[1] Photoelastic experiments with an overhead polariscope
[2] Polariser and analyser each comprising a polarisation filter and quarter wave filter
[3] Filter enclosed, with stress-free glazing
[4] All filters rotatable in any direction on the horizontal plane
[5] Plane or circular polarised light possible
[6] Green filter for monochromatic light
[7] Load application device with force gauge for compressive and tensile loading
[8] 8 different polycarbonate (PC) models supplied
[9] Box to house the components
Technical Data
Filter holder
2 filter, enclosed in glass, each comprising
- 1 polarisation filter, diameter: d=165mm
- 1 quarter wave filter, diameter: d=165mm
- 1 green filter, diameter: d=150mm
Load application device with force gauge
- Load force: 0...250N
8 models, PC
- bar without notches
- bar with hole
- bar notched on one side
- bar notched on both sides
- rectangle without cut-outs
- rectangle with cut-outs
- fork
- crane hook
Dimensions and Weight
l x w x h: 500 x 190 x 30 mm (frame)
l x w x h: 280 x 280 x 90 mm (filter holder)
Weight: approx. 8 kg
Scope of Delivery
1 frame with load application device
1 filter holder with polariser and analyser
1 green filter
8 photoelastic models
1 box with foam inlay
1 set of instructional material
Order Details
021.21000  FL 210  Photoelastic Demonstration
© 2005 G.U.N.T. Gerätebau GmbH