Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Properties of Materials  |  WP 140  |  WP 140.01
WP 140.01 Set of 3 Specimens Steel Show data sheet (pdf file) Print page
Technical Description
These specimens are available as an accessory for the WP 140 Fatigue Testing Machine. They are of circular cross-section. The shaft shoulder between the bar and the clamping pin has a different fillet radius on two of the specimens. In addition to the different radii, the quality of the surface finish is also different. In this way the influence of these features can be optimally investigated. Each specimen has clamping pin of 12 x 40mm for clamping. The set contains three specimens made of steel Ck35.
Learning Objectives / Experiments
Fatigue testing of bars under reverse bending stress
Influence of different fillet radii and qualities of surface finish on fatigue strength
Features
Steel specimens for reversed bending stress as accessories for the WP 140 Fatigue Testing Machine
Specification
[1] Specimens for fatigue strength testing under reversed bending stress, accessory for the WP 140 Fatigue Testing Machine
[2] Material, steel Ck35
[3] Specimen diameter 8mm, specimen length 146mm,
[4] Two fillet radii R2 and R0.5 and two different qualities of surface finish Rz4.0 and Rz25 on the shaft shoulder
Technical Data
Bar material: steel Ck35
Bar diameter : 8mm
Bar total length: 146mm
Fillet radii: R2 and R0.5
Quality of surface finish of the radii: Rz4.0 and Rz25
Scope of Delivery
3 test specimens
Order Details
020.14001 WP 140.01 Set of 3 Specimens, Steel
Print
© 2005 G.U.N.T. Gerätebau GmbH