Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Strength of Materials  |  SE 110.29
SE 110.29 Torsion of Bars Show data sheet (pdf file) Print page
Technical Description

Torsion occurs primarily on axles and drive shafts in motor vehicles and machines. The torsion occurring in the shaft cause cross-sections of the shaft to be pushed together around the longitudinal axis. When a torque is applied to a circular shaft the cross-section remains flat and no warpage occurs.

  In the event of minor torsion the length and radius remain unchanged. The straight lines on the outer circumference of the shaft running parallel to the axis become helixes. Non-circular cross-sections mostly result in warpage.

  SE 110.29 investigates the torsion of a bar under a torque. The bar is clamped into two movable bearing blocks by a chuck. The torque is generated by a circular disc, a deflection roller and a weight. The clamping length and torque can be varied. The resultant torsion is read-off at two random points on the bar by means of angle indicators.

  The fundamentals of elastic torsion are illustrated by the round bar. Three other bars are provided in order to investigate special cases: two thin-walled enclosed sections (a tube and a square tube) and a longitudinally slotted tube (thin-walled open section).

    The various elements of the experiment are clearly laid-out and housed securely in a storage system. The complete experimental set-up is arranged in the frame SE 112.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments

- Torsion of a bar
- Shear modulus of elasticity and 2nd polar moment

  of area
- Angle of twist dependent on clamping length
- Angle of twist dependent on torque
- Influence of rigidity on torsion
  * round bar with full cross-section
  * tube
  * tube, longitudinally slotted
  * square tube
- Calculation of angle of twist
- Comparison of calculated and measured angle of



* Elastic torsion of a bar1
* Round bar, tube, longitudinally slotted tube and
  square tube as test bars1
* Indication of the angle of twist at two random points

  on the bar

Available accessories
SE 112 -- Mounting Frame
Alternative products
WP 100 -- Deformation of Bars under Bending or Torsion 

[1] Elastic torsion of bars
[2] 2 movable bearing blocks with clamping chuck for mounting of bars, 1 fixed and 1 movable bearing
[3] 2 movable angle indicators clampable to the bar
[4] 4 bars: round bar with full cross-section, tube, longitudinally slotted tube, square tube
[5] Application of load to the bar by a mass disc, a deflection roller and a set of weights
[6] Storage system to house the components

[7] Experimental set-up in frame SE 112

Technical Data
4 brass bars, l=695mm
- round bar, d=6mm
- tube, slotted tube
  d=6mm, wall thickness: 1mm, slot width: 0.3mm
- square tube
  w x h: 6mm, wall thickness: 1mm
Disc to apply the load
- effective radius: 110mm
Angle indicator
- measuring range: -90...+90, graduations: 1
- 1x 1N (hanger)
- 4x 1N
- 3x 5N
Dimensions and Weight
Weight: approx. 15 kg
Scope of Delivery
2 bearing blocks with clamping chuck
2 angle indicators
4 bars
1 deflection roller with fixture
1 cable
1 set of weights
2 hexagon socket wrenches
1 storage system
1 set of instructional material
Order Details

022.11029  SE 110.29  Torsion of Bars

© 2005 G.U.N.T. Gerätebau GmbH