Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Fundamentals of Engineering Design  |  TM 260.01
TM 260.01 Experimental Module Rolling / Sliding Disc Show data sheet (pdf file) Print page
Technical Description

The slip forces between two rotating friction discs in contact can be determined using this accessory module. The unit is intended for operation with the basic module TM 260. Connection to the basic module is made using a clamped coupling. The slip between the discs is maintained at a constant 4% by a gearbox. The contact pressure can be adjusted in steps (10N) up to max. 80N. This adjustment is performed using a lever with a mechanical advantage of 2:1. A strain gauge force transducer connected to the controller measures the friction forces directly. The unit has a container for supplying lubricant. Knurled bolts enable the friction discs to be changed easily.

 

Learning Objectives / Experiments

- Friction forces as a function of the load
- Friction forces as a function of the lubrication
- Friction forces as a function of the operating speed

 

Features

* Investigation of slip forces between two rotating

  discs in contact

Specification

[1] Supplementary experiment on slip forces between two rotating discs in contact
[2] Friction discs 53mm diameter, materials: aluminium/rubber
[3] Gearbox ratio i: 0.96
[4] Strain gauge transducers for friction force 0...50N
[5] Weight set up to 40N
[6] l x w x h 490x280x150mm

 

Technical Data

Friction discs

- diameter: 53mm
- materials: aluminium/rubber
Gearbox ratio: i = 0.96
Strain gauge transducers for friction force: 0...50N
Weight set up: to 40N

 

Dimensions and Weight
l x w x h : 490 x 280 x 150 mm
Weight : approx. 10 kg
Scope of Delivery

1 gearbox module

1 force transducer module
2 friction discs

1 instruction manual

Order Details

040.26001  TM 260.01  Experimental Module

                     Rolling / Sliding Disc


Print
© 2005 G.U.N.T. Gerätebau GmbH