Home           Products           Company           Contact us     
Engineering Mechanics and Machine Elements
Mechatronics
Thermal Engineering and HVAC
Fluid Mechanics
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Process Engineering
Overviews
Products  |  Fluid Mechanics  |  Fundamentals of Fluid Mechanics  |  HM 150.29
HM 150.29 Losses in Bends and Fittings Print page
Technical Description

DATA SHEET UNDER REVISION!

The HM 150.29 unit is used for the investigation of pressure losses in bends, fittings and valves, as well as in constrictions and increases in size. The measured section consists of a pipe system with different fittings, a ball-cock, an increase in size and a constriction. The flow rate can be adjusted using the ball-cock. A 6 tube manometer and a spring-tube manometer are used to determine individual differential pressures. Annular measuring chambers guarantee interference-free pressure measurement. The water supply is provided by the HM 150 Basic Hydraulics Bench.

 
Learning Objectives / Experiments

- Investigation of the pressure losses at bends and

  fittings
- Comparison of different bends and fittings
- Determination of a valve characteristic curve
Features

* Experimental set-up for the investigation of pressure

  losses in bends and fittings
Alternative products
HM 150.11 -- Losses in Piping Elements, Valves and Fittings
Specification

[1] Experimental set-up for placing on the HM 150 Basic Hydraulics Bench
[2] With HM 150 Basic Hydraulics Bench a closed water circuit is set up
[3] 6 tube manometer 0…300mmWC
[4] Spring-tube manometer 0...0.6bar
[5] Pipework as well as fittings made of plastic
[6] Constriction, increase in size, ball-cock, pipe bend, elbows and bends as measured objects

 
Technical Data

6 tube manometer 0...300mmWC
Spring-tube manometer 0...0.6bar
Nominal diameter of pipework 17mm

 
Dimensions and Weight
l x w x h: 875 x 640 x 900 mm
Weight: approx. 31kg
Scope of Delivery
1 experimental set-up, 1 manual
Order Details

070.15029  HM 150.29  Losses in Bends and

                     Fittings
Print
© 2005 G.U.N.T. Gerätebau GmbH