|
|
DATA SHEET UNDER REVISION! Using the flow from nozzles experimental set-up in combination with the HM 225 Air Flow Bench, the velocity distribution and the flow losses on the outlet of a jet into the open can be investigated. Here the jet is outlet from a sharp edged, chamfered pipe. The pressure and velocity distribution in the jet can be measured using a Pitot tube, this can be moved horizontally and vertically over the entire flow field. Scales enable the Pitot tube to be positioned exactly. The experimental set-up is fitted to the HM 225 test stand using quick action fasteners. |
 |
Learning Objectives / Experiments |
· Measurement of pressure loss on the outlet of a jet into the open
· Velocity profile on the outlet of the jet |
|
|
|
Features
|
|
|
| · Investigation of flow from nozzles |
|
|
|
| Specification |
[1] Accessory for the HM 225 Air Flow Bench
[2] Experimental set-up for determining the pressure loss and velocity distribution at the outlet of a jet into the open
[3] Outlet from a sharp edged, chamfered plastic pipe, diameter 54mm
[4] Pitot tube, for usage with HM 225.01 Multi Tube Manometer |
| Technical Data |
Outlet diameter: 54mm
Adjustment range of the Pitot tube
Horizontal: -150..150mm
Vertical: 700mm
Pitot tube measuring opening: diameter 2mm |
| Dimensions and Weight |
l x w x h : 430 x 380 x 900 mm
Weight : approx. 6 kg |
| Scope of Delivery |
| 1 experimental set-up, 1 instruction manual |
| Order Details |
070.22507 HM 225.07 Round Turbulent Jet Apparatus
|
|
