Home           Products           Company           Contact us     
Engineering Mechanics and Machine Elements
Mechatronics
Thermal Engineering and HVAC
Fluid Mechanics
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Process Engineering
Overviews
Products  |  Fluid Mechanics  |  Hydraulic Fluid Energy Machines  |  HM 365.11
HM 365.11 Centrifugal Pump Module Print page
Technical Description
Standard type centrifugal pumps represent an economical to manufacture basic model for all possible applications for irrigation and drainage. The pump is fitted to a base plate ready for installation. This is simply slid into the HM 365.10 Basic Module Water Pumps and fixed in place. The unit is equipped with electronic sensors for recording intake and delivery pressure. After filling with water, the pump is connected to the experimental set-up using flexible hoses. To be able to interchange the pump easily and straightforwardly, the hoses are equipped with rapid action couplings. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit.
Learning Objectives / Experiments
Together with the HM 365 Universal Drive and Brake Unit and the HM 365.10 Basic Module Water Pumps, the following experiments are possible:
· Recording of pump curves
· Determination of the power requirement of the pump
· Determination of the hydraulic power output of the pump
· Determination of the pump efficiency
· Determination of the system characteristic and operating point of the pump
· Checking of the necessary NPSH value for the pump
Features
Investigation of the pump characteristic of a standard type centrifugal pump
Available accessories
HM 365 -- Universal Drive and Brake Unit
HM 365.10 -- Water Pump Supply Module
Alternative products
HM 365.12 -- Centrifugal Pump Module with Side Channel Stage
HM 365.13 -- Multistage Centrifugal Pump Module
HM 365.14 -- Series / Parallel Pumps Module
HM 365.15 -- Side Channel Pump Module
HM 365.16 -- Lobe Pump Module
HM 365.17 -- Piston Pump Module
HM 365.18 -- Gear Pump Module
HM 365.19 -- Vane Pump Module
Specification
[1] Standard type centrifugal pump for the operation of the HM 365.10 Basic Module Water Pumps
[2] Pump complete with connections and sensors fitted to base plate
[3] Max. capacity 21m³/h
[4] Max. head 19m WC
[5] Nominal speed 2900rpm
Technical Data
Maximum capacity: 21m³/h
Maximum head: 19m WC
Nominal speed: 2900rpm
Intake connection diameter DN 50
Delivery connection diameter DN 32
Dimensions and Weight
lxwxh : 500 x 300 x 310 mm
Weight : approx. 24 kg
Scope of Delivery
1 centrifugal pump, fitted to base plate complete with connections and sensors
Order Details
070.36511 HM 365.11 Centrifugal Pump Module
Print
© 2005 G.U.N.T. Gerätebau GmbH