Home           Products           Company           Contact us     
Engineering Mechanics and Machine Elements
Mechatronics
Thermal Engineering and HVAC
Fluid Mechanics
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Process Engineering
Overviews
Products  |  Fluid Mechanics  |  Hydraulic Fluid Energy Machines  |  HM 365.10
HM 365.10 Water Pump Supply Module Print page
Technical Description

DATA SHEET UNDER REVISION!

The Basic Module Water Pumps is part of an equipment series that facilitates the investigation of a wide range of engines and machines. Different water pumps can be operated on the basic module and investigated in respect of their characteristic behaviour. The pumps are installed in the experimental set-up using flexible hoses with rapid action couplings. The flow rate is set on a ball-cock and acquired with a magneto-inductive flowmeter. The sensors for intake and delivery pressure are fitted to the pumps to be investigated. All sensors are connected to the measuring unit that is part of the basic module. The measured values recorded are displayed on digital displays on this block. The drive motor for the pump drive is fitted to the HM 365 Universal Drive and Brake Unit.
Learning Objectives / Experiments
Together with the HM 365 Universal Drive and Brake Unit and a pump, the following experiments are possible:
· Recording of pump curves
· Determination of the power requirement of the pump
· Determination of the hydraulic power output of the pump
· Determination of the pump efficiency
· Determination of the system characteristic curve and the operating point of the pump
· Checking of the necessary NPSH value of the pump
Features
Modular series of units for the investigation of a range of engines and machines
Basic module for the operation of various water pumps
Processing of the measured values on a PC
Available accessories
HM 365.11 -- Centrifugal Pump Module
HM 365.12 -- Centrifugal Pump Module with Side Channel Stage
HM 365.13 -- Multistage Centrifugal Pump Module
HM 365.14 -- Series / Parallel Pumps Module
HM 365.15 -- Side Channel Pump Module
HM 365.16 -- Lobe Pump Module
HM 365.17 -- Piston Pump Module
HM 365.18 -- Gear Pump Module
HM 365.19 -- Vane Pump Module
Alternative products
HM 365.20 -- Oil Pump Supply Module
HM 365.32 -- Turbine Supply Unit
Specification
[1] Basic module for the operation of water pumps
[2] Experimental set-up on laboratory trolley
[3] Copper piping with ball-cock and magneto-inductive flowmeter 25m³/h
[4] Connection to the pumps via flexible hoses with rapid action couplings
[5] Supply tank made of plastic, 96Ltr
[6] Measuring unit block for the connection of the electronic sensors
[7] Digital display of the measured values and relaying to PC data acquisition
[8] 230V,~50Hz, connected via HM 365 Universal Drive and Brake Unit
Technical Data
Measuring range
Measurement intake pressure: -1...+1bar
Measurement delivery pressure: 0...6bar
Temperature measurement: 0...100°C
Measurement of flow rate: 0...25m3/h

Supply tank
Capacity 96Ltr
Dimensions and Weight
l x w x h: 1200 x 800 x 1150 mm
Weight : approx. 80 kg
Required for Operation
230V,~50Hz connected via the HM 365 Universal Drive and Brake Unit
Scope of Delivery
1 basic module with measuring unit block,
2 connecting hoses, 1 instruction manual
Order Details
070.36510 HM 365.10 Water Pump Supply Module
Print
© 2005 G.U.N.T. Gerätebau GmbH