Home           Products           Company           Contact us     
Engineering Mechanics and Machine Elements
Mechatronics
Thermal Engineering and HVAC
Fluid Mechanics
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Process Engineering
Overviews
Products  |  Fluid Mechanics  |  Hydraulic Fluid Energy Machines  |  HM 365.14
HM 365.14 Series / Parallel Pumps Module Print page
Technical Description
On series and parallel configurations of pumps, a particularly good analogy to electrical circuits may be formed. The pumps are fitted to a base plate ready for installation. This is slid into the mounting on the HM 365.10 Basic Module Water Pumps and fixed in place. The pumps are equipped with electronic sensors for the acquisition of the intake and delivery pressure. After filling with water, the pump is connected to the experimental set-up using flexible hoses. Additional hoses are supplied. To be able to interchange the pumps easily and straightforwardly, the hoses are equipped with rapid action couplings. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit.
Learning Objectives / Experiments
Together with the HM 365 Universal Drive and Brake Unit and the HM 365.10 Basic Module Water Pumps, the following experiments are possible:
· Recording of pump curves
· Determination of the power required for series and parallel configuration
· Determination of the hydraulic power output for series and parallel configuration
· Determination of the pump efficiency
· Determination of the system characteristic and operating point for both cases
Features
Investigation of the pump characteristic of series and parallel configurations of 2 pumps
Available accessories
HM 365 -- Universal Drive and Brake Unit
HM 365.10 -- Water Pump Supply Module
Specification
[1] 2 standard type centrifugal pumps for operation on the HM 365.10 Basic Module Water Pumps
[2] Pumps fitted to base plate complete with connections and sensors
[3] Max. capacity 21m³/h per pump
[4] Max. head 19m water column per pump
[5] Nominal speed 2900rpm
Technical Data
Maximum capacity per pump: 21m³/h
Maximum head per pump: 19m WC
Nominal speed: 2900rpm
Intake connection diameter DN 50
Delivery connection diameter DN 32
Dimensions and Weight
l x w x h: 600 x 530 x 310 mm
Weight : approx. 44 kg
Scope of Delivery
2 centrifugal pumps with connections and sensors fitted to base plate, 1 set of hoses
Order Details
070.36514 HM 365.14 Series / Parallel Pumps Module
Print
© 2005 G.U.N.T. Gerätebau GmbH