Home           Products           Company           Contact us     
Engineering Mechanics and Machine Elements
Mechatronics
Thermal Engineering and HVAC
Fluid Mechanics
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Process Engineering
Overviews
Products  |  Fluid Mechanics  |  Hydraulic Fluid Energy Machines  |  HM 365.15
HM 365.15 Side Channel Pump Module Print page
Technical Description
Because of its low weight per unit of power, this type of pump is wide spread in industry. The pump is fitted to a base plate ready for installation. This is simply slid into the HM 365.10 Basic Module Water Pumps and fixed in place. The unit is equipped with electronic sensors for recording intake and delivery pressure. After filling with water, the pump is connected to the experimental set-up using flexible hoses. To be able to interchange the pump easily and straightforwardly, the hoses are equipped with rapid action couplings. The motor necessary for drive is fitted to the HM 365 Universal Drive and Brake Unit.
Learning Objectives / Experiments
Together with the HM 365 Universal Drive and Brake Unit and the HM 365.10 Basic Module Water Pumps, the following experiments are possible:
· Recording of pump curves
· Determination of the power requirement of the pump
· Determination of the hydraulic power output of the pump
· Determination of the pump efficiency
· Determination of the system characteristic and operating point of the pump
· Checking of the necessary NPSH value for the pump
Features
Investigation of the pump characteristic of a side channel type centrifugal pump
Available accessories
HM 365 -- Universal Drive and Brake Unit
HM 365.10 -- Water Pump Supply Module
Specification
[1] Side Channel type centrifugal pump for the operation of the HM 365.10 Basic Module Water Pumps
[2] Pump complete with connections and sensors fitted to base plate
[3] Max. capacity 2.1m³/h
[4] Max. head 48m WC
[5] Nominal speed 1450rpm
Technical Data
Maximum capacity: 2.1m³/h
Maximum head: 48m WC
Nominal speed: 1450rpm
Intake connection diameter 1”
Delivery connection diameter 1”
Dimensions and Weight
lxwxh : 500 x 300 x 310 mm
Weight : approx. 24 kg
Scope of Delivery
1 centrifugal pump, fitted to base plate complete with connections and sensors
Order Details
070.36515 HM 365.15 Side Channel Pump Module
Print
© 2005 G.U.N.T. Gerätebau GmbH