|
|
DATA SHEET UNDER REVISION! The experimental set-up is placed in the HM 220 Air Flow Studies unit with only a few actions. The model consists of a transparent tube in which the flat plate is placed. Above the plate, a vertically adjustable Pitot tube is fitted using which the flow speeds at the plate can be measured. The Pitot tube can be fitted on a holder in 3 positions along the plate. The Pitot tube is connected to the manometer belonging to the studies unit. |
 |
Learning Objectives / Experiments |
· Measurement of the boundary layer
· Speed profile of the flow over the plate |
|
|
|
Features
|
|
|
| Pipe with flat plate with flow for boundary layer experiments on the Air Flow Studies Unit |
|
|
|
| Specification |
[1] Tube with boundary layer for placing in the HM 220 Air Flow Studies Unit
[2] Transparent observation tube with flat plate or boundary layer experiments
[3] 3 holders for Pitot tube for horizontal measurement of the boundary layer
[4] Pitot tube with micrometer bolt, vertically adjustable |
| Technical Data |
3 holders for Pitot tube for horizontal measurement at the plate
Vertical adjustment of Pitot tube 25mm
Flat plate 420x80x3, chamfered at 15° |
| Dimensions and Weight |
l x w x h: 650 x 150 x 300 mm
Weight: approx. 4 kg |
| Scope of Delivery |
| 1 boundary layer tube |
| Order Details |
070.22002 HM 220.02 Boundary Layer Flow
|
|
