Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Dynamics  |  TM 150  |  TM 150.01
TM 150.01 Vibration Sensor with Clamping Set Show data sheet (pdf file) Print page
Technical Description

The sensor is used to measure electrically the amplitudes of various oscillators on the trainers TM 150 and TM 155. Because it does not require contact, it avoids the possibility of false readings. The induction-based displacement principle makes it possible to measure amplitude on practically any metal object. The sensor provides an analog position-proportional voltage value as the output signal. The required power is supplied by the sensor supply module TM 151.

  TM 151 supplies up to 4 sensors and processes the sensor signals, i.e. to be shown on an oscilloscope.

 

Learning Objectives / Experiments

The sensor can be used with TM 150 or TM 155 for the following experiments
- Pendulum experiments
- Natural oscillation of a bar-type oscillator
- Damped oscillation of a bar-type oscillator
- Forced oscillation of a bar-type oscillator (damped and undamped

  resonance)

 

Features
* Non-contact inductive position sensor
Available accessories
TM 150.20 -- Software for Data Acquisition
TM 151 -- Sensor Supply Module
Specification

[1] Inductive position sensor, non-contact
 

Technical Data

Measurement principle: inductive, non-contact
Measuring range: 5...10mm
Frequency range: 0...50Hz
Output signal: 0...10V proportional
Assembly wrench size: 36mm

 

Dimensions and Weight
Diam. x l: 83 x 200 mm
Weight: approx. 0.25 kg
Scope of Delivery
1 sensor with cable
1 sensor holder
Order Details

040.15001  TM 150.01  Vibration Sensor with

                     Clamping Set


Print
© 2005 G.U.N.T. Gerätebau GmbH