Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Applied Thermodynamics  |  WL 110.04
WL 110.04 Jacketed Vessel with Stirrer & Coil Show data sheet (pdf file) Print page
Technical Description

  In many engineering processes, several basic operations are combined. For example, in a tank a chemical reaction takes place during which heat is to be supplied or removed. Such tanks are equipped with jacket or a coiled tube. Depending on the process, the medium in the jacket or in the coiled tubing is used for heating or cooling of the tank content. For a better mixing of the tank content and an even temperature distribution stirring maschines are used. The product temperature at an even temperature distribution is precisely adjustable. Considered here, the jacketed heat exchanger is a model for such tanks.

  The WL 110.04 is part of a series of units enabling experiments to be performed on different heat exchanger types. In conjunction with the WL 110 service unit, which has a hot and cold water circuit and all of the necessary connections, the experimental unit is ideally suited for investigating the functioning and behaviour of a jacketed heat exchanger in operation.
  The WL 110.04 is connected to the WL 110 using quick-release couplings. The jacketed heat exchanger consists of a tank surrounded by a jacket. The tank is fitted with a coiled tube. In heating mode with jacket the hot water flows through the jacket and transfers a part of the thermal energy to the cold water in the tank. In heating mode with coiled tube the hot water flows through the coil and heats the cold water in the tank. A stirring machine can be used in all modes. Valves on the service unit are used to adjust the flow of hot water. The temperature sensors for measuring the inlet and outlet temperature are located at the supply connections on the WL 110.  An additional temperature

sensor measures the temperature in the tank.

  During experiments, time curves are plotted and displayed graphically.  Aditionally, the measured values can be recorded and processed using data acquisition software.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments

In conjunction with WL 110 service unit
- function and behaviour during operation of a 
  jacketed heat exchanger
- plotting time curves
  * heating mode with jacket
  * heating mode with coiled tube
- influence of a stirring machine 
- comparison with other heat exchanger types

* Jacketed vessel with stirrer and coil for
  connection to WL 110 service unit1
* Stirrer for improved mixing of medium1
* Heating using jacket or coiled tube

[1] jacketed heat exchanger for connection to WL 110
[2] hot and cold water supply from WL 110
[3] heating using jacket or coiled tube
[4] stirring machine can be used in all modes
[5] speed of stirring machine adjustable using WL 110
[6] visible working area due to transparent cover

[7] recording of temperature using WL 110 and additional temperature sensor for measuring temperature in tank


Technical Data


- nominal value: approx. 1,2L
Stirring machine
- speed: 0...330rpm

Heat transfer area
- jacket (stainless steel): approx. 0,05m2
- coil (stainless steel): approx. 0,05m2
Measuring range
- temperature: 0...100C


Dimensions and Weight

LxWxH: 400x230x400mm

Weight: approx. 8kg

Scope of Delivery
1 jacketed vessel with stirrer & coil
1 set of instructional material
Order Details
060.11004  WL 110.04  Jacketed Vessel with
                             Stirrer & Coil
© 2005 G.U.N.T. Gerätebau GmbH