This cooling tower with forced draught can be integrated into the cooling water circuit on the ET 830. Evaporation loss are compensated automatically. Temperature, atmospheric humidity and water flow rate are measured at the inlet and outlet of the cooling tower.
The tower is designed using corrosion-resistant materials suitable for outdoor use.
The cooling tower is connected to the electrical system and water system in the ET 830.
Learning Objectives / Experiments
- Energy balance
Features
* Compact cooling tower for steam power plant ET 830
Specification
[1] Wet cooling tower with fan and pump for operation with the ET 830 [2] Corrosion resistant materials used [3] Rotameters at inlet and outlet [4] Combined temperature/humidity measurement
Technical Data
Cooling tower
- cooling capacity: approx. 115kW
- fan: 3900m³/h at 1450min-1
- pump: 20m³/h
Measuring ranges
- temperature: -10...50°C, 0...80°C
- pressure: 0...2,5bar, 0...4bar
- flow rate: 0...10m³/h, 0...20m³/h
- humidity: 2...95% r.h.
Dimensions and Weight
l x w x h: 1685x850x1805mm Weight: approx. 120kg
Required for Operation
400V, 50/60Hz, 3 phase or 230V, 60Hz, 3 phase (via ET 830)
