Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Refrigeration and Air Conditioning Technology  |  ET 915.06
ET 915.06 Model of a Simple Air Conditioning System Show data sheet (pdf file) Print page
Technical Description

  ET 915.06 is part of the HSI training system for refrigeration and air conditioning technology. In combination with the base unit ET 915 the operational model of a simple air conditioning system is created. The model is plugged onto the base unit, secured using fasteners and connected with refrigerant hoses to become a complete refrigeration circuit for the air cooler.
  In systems for room cooling the air to be cooled is aspirated from the room by a fan, cooled and fed back into the room. This model demonstrates the principles of room cooling and the components of an air conditioning system.
  The model ET 915.06 includes an air duct with transparent front, fan for air transport, an evaporator as air cooler and an expansion valve. All components are clearly arranged on a panel.
  The individual components of the system, here the compressor and the fan, are controlled via the software included in the scope of delivery of ET 915. The software offers the option to simulate faults.
  The air flow is determined via a pressure measurement using a pitot tube. Temperatures before and after the evaporator are recorded by sensors, digitised and dynamically represented in the educational software.

Learning Objectives / Experiments

- Air conditioning system for room cooling and its

  main components
- Principle of operation of an evaporator as air cooler
- Fault simulation


* Model of a simple air conditioning system for room

* Component control and fault simulation via the

  educational software

Available accessories
ET 915 -- HSI Training System Refrigeration and Air Conditioning Technology, Base Unit
Alternative products
ET 600 -- Conditioning of Room Air
ET 915.07 -- Air Conditioning Model
[1] Model of a simple air conditioning system to plug onto the base unit ET 915
[2] GUNT training system with HSI technology
[3] Air duct with transparent front
[4] Evaporator as air cooler
[5] Radial fan with throttle valve
[6] Thermostatic expansion valve as expansion element
[7] Sensor to record temperature and differential pressure for measuring the air flow
[8] Units and fault simulation controlled via educational software
Technical Data
Air duct: 136x136x435mm
Evaporator as air cooler
- transfer area: approx. 900cm
Radial fan
- max. power consumption: 80W
- max. flow rate: 255m/h
Measuring ranges
- temperature: 2x -50...50C,  2x 0...100C
- differential pressure: 0...10mbar 
Dimensions and Weight
l x w x h: 970x370x600mm
Weight: approx. 35kg
Scope of Delivery
1 model of a simple air conditioning system, filled with refrigerant
Order Details

061.91506  ET 915.06  Model of a Simple Air

                                     Conditioning System

© 2005 G.U.N.T. Gerätebau GmbH