Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Applied Thermodynamics  |  WL 320.01
WL 320.01 Cooling Column, Type 2 Show data sheet (pdf file) Print page
Technical Description

Cooling columns contain wet deck surfaces. The cooling capacity of a cooling column is determined by the surface of these wet deck surfaces.

  WL 320.01 contains a small wet deck surface. The cooling column type 2 is placed into WL 320 instead of the column type 1. The cooling capacity of both columns is compared.

  On top of the cooling column, a nozzle is mounted. The hot water is sprayed at the top of the cooling tower, trickles from the top to the bottom along the wet deck surface and is cooled in the process. The air enters the column from the bottom and flows upwards.

  The cooling column is fitted with connections for differential pressure measurement at its inlet and outlet.


Learning Objectives / Experiments
- Determination of the cooling capacity
* Cooling column contains small wet deck surface

[1] Additional cooling column for the wet cooling tower WL 320
[2] Cooling column made of transparent plastic

[3] Wet deck surface made of plastic
[4] Connections to measure the pressure loss with WL 320


Technical Data

Specific surface of the wet deck surface: 77m/m
Cross-section: 150x150mm


Dimensions and Weight
l x w x h: 210 x 210 x 630 mm
Weight: approx. 5 kg
Scope of Delivery
1 cooling column type 2
Order Details
060.32001  WL 320.01  Cooling Column, Type 2
© 2005 G.U.N.T. Gerätebau GmbH