Home           Products           Company           Contact us     
> Basic Knowledge
-- Fuzzy Control
-- Gas Turbines
-- Steam Power Plants
-- Internal Combustion Engines
-- Principles of Cold Production
-- Thermodynamics of the Refrigeration Cycle
-- Compressors in Refrigeration
-- Heat Exchangers in Refrigeration
-- Primary and Secondary Controllers
-- Piping
-- Making of Piping
-- Heat Pumps
-- Fundamentals of Air Conditioning
-- Set-up of an Air Conditioning System
-- Ventilation Systems and their Components
-- Electrical Engineering in Refrigeration
-- Process Control Engineering
-- Drying and Evaporation
-- Distillation/Rectification
-- Absorption and Adsorption
-- Crystallisation and Membrane Separation Processes
-- Extraction
-- Classifying and Sorting
-- Separation in a Gravity Field
-- Separation in a Centrifugal Force Field
-- Filtration
-- Comminution
-- Mixing and Agglomeration
-- Storage and Flow of Bulk Solids
-- Fluidised Beds and Pneumatic Transport
-- Flotation and Sedimentation
-- Filtration (water)
-- Aerobic Processes
-- Anaerobic Processes
-- Adsorption and Membrane Separation Processes
-- Ion Exchange and Precipitation/Flocculation
-- Chemical Oxidation
-- Combined Unit Operations
-- Fundamentals of Hydrostatics
-- Fundamentals of Hydrodynamics
-- Fundamentals of Sediment Transport
-- Seepage Flow
> Overviews
-- WP 120 Buckling Behaviour of Bars
-- FL 151 Recording and Evaluation of Strain Gauge Signals
-- FL 200 - FL 210 Representation of Stress Distribution
-- TM 182 Vibrations on Machine Foundations
-- HL 962 Assembly and Maintenance Exercises: Pipes, Fittings, Pumps
-- PT 500 Machinery Diagnostic System
-- RT 010 - RT 060 Fundamentals of Process Control
-- RT 121 - RT 124 Fuzzy Control
-- RT 350 - RT 380 Trainers for Process Automation
-- RT 450 Modular Process Automation Training System
-- RT 512 - RT 552 Process Control Training Rigs with Process Control System
-- RT 614 - RT 674 Introduction to Industrial Process Control
-- WL 110 Modular Heat Exchanger Training Equipment
-- WL 320 Wet Cooling Tower
-- ET 792 - ET 796 Gas Turbines
-- ET 810 - ET 851 Steam Power Plants
-- ET 813 Experimental Plant Steam Engine
-- ET 850 & ET 851 Laboratory Scale Steam Power Plant
-- ET 833 Compact Steam Power Plant 1.5kW
-- ET 805 Steam Power Plant 20kW
-- ET 500 - ET 513 Compressors
-- ET 513 Single-Stage Compressor
-- CT 110 Test Stand for Single Cylinder Engines, 7.5kW
-- CT 159 Modular Test Stand for Single Cylinder Engines
-- CT 300 Engine Test Stand, 11kW
-- CT 400 Test Stand for 4-Cylinder Engines
-- ET 165 Compression Refrigeration System with HM 365
-- ET 422 Capacity Control and Faults in Refrigeration Systems
-- ET 900 - ET 915 Modular Systems in Refrigeration
-- ET 900 Introduction to Refrigeration
-- ET 910 Refrigeration Training System
-- ET 915 HSI Training System for Refrigeration and Air Conditioning Technology
-- ET 405 Heat Pump for Cooling and Heating
-- ET 420 Ice Stores in Refrigeration
-- ET 605 Air Conditioning System Model
-- ET 611 Air Conditioning System with Chamber for Comfort Investigations
-- ET 620 Real Air Conditioning and Ventilation System
-- Fundamental Experiments on Heating
-- Heating Systems in Buildings
-- HL 353 Modular Hot Water System
-- HL 710 Planning and Set-up of Air Duct Systems
-- ST 510 Full-Scale Sewerage System
-- HM 500 Methods of Flow Rate Measurement
-- RT 310 Working with the Calibration Station
-- RT 590 Process Control Engineering Experimentation Plant
-- HM 220 Air Flow Study Unit
-- HM 240 Principles of Air Flow
-- WL 312 Multipurpose Air Duct and Heat Transfer Unit
-- CE 587 Dissolved Air Flotation
-- CE 579 Depth Filtration
-- CE 702 Anaerobic Water Treatment
-- CE 705 Activated Sludge Process
-- CE 583 Adsorption
-- CE 586 Precipitation and Flocculation
-- CE 640 Biotechnical Production of Ethanol
-- 2D Visualisation of Streamlines
-- HM 170 Open Wind Tunnel
-- Experiments with HM 170
-- HM 170 Accessories
-- HM 225 Aerodynamics Trainer
-- HM 225 Experiments in the Field of Flow Around Bodies
-- Devices Steady Flow of Compressible Fluids
-- HM 230 Flow of Compressible Fluids
-- HM 172 Supersonic Wind Tunnel
-- Devices Transient Flow
-- Devices Fundamentals Hydrodynamics
-- Devices Turbomachines
-- HM 150 Range
-- HM 160 Experimental Flume
-- HM 161 Experimental Flume
-- HM 162 Experimental Flume
-- Flumes Accessories
-- Setup of Experimental Flumes
-- Devices Sediment Transport
-- Devices Seepage Flow
> Chapter Overviews
-- Introduction to Catalogue No. 1a
-- Learning Contents of Catalogue No. 1a
-- Introduction to Catalogue No. 2
-- Assembly Projects
-- Maintenance
-- Automation
-- Introduction to Catalogue No. 3
-- Introduction to Catalogue No. 3a
-- Introduction to Catalogue No. 3b
-- Introduction to Catalogue No. 5a
-- Introduction to Catalogue No. 5b
-- Introduction to Catalogue 5c
-- Learning Contents of Catalogue 5c
-- 3 Series Featuring Simple Control Systems
-- Introduction to Catalogue No. 5d
-- Flow around Bodies
-- Steady Flow of Compressible Fluids
-- Transient Flow
-- Introduction to Catalogue 4b
-- Steady Flow of Incompressible Fluids
-- Hydraulic Engineering
-- Experimental Flumes
Products  |  Overviews  |  Overviews  |  RT 010 - RT 060 Fundamentals of Process Control

RT 010 - RT 060 Fundamentals of Process Control Engineering

Process control is a key area in any study of automation.


With this model series, GUNT offers six systems providing an introduction to the fundamentals of process control through the use of experimentation. Software plays a key role as an integral component of the equipment concept, in the sense of hardware / software integration (HSI). It relieves students from routine activities and supports interactive action when they are experimenting with new approaches.

The effects of changes to control parameters or disturbance variables on the system behaviour can be investigated quickly and easily. In contrast to purely computer-based simulation, these actual models of controlled systems provide a closer link to the real world, and so aid understanding.

The network capability of the software enables teacher / student systems to be established.

 

RT 010  Training System: Level Control, HSI


RT 020  Training System: Flow Control, HSI

 

RT 030  Training System: Pressure Control, HSI

 

RT 040  Training System: Temperature Control, HSI

 

RT 050  Training System: Speed Control, HSI

 

 RT 060  Training System: Position Control, HSI

 

 

Software:

 

 

State-of-the-art control and measurement data acquisition software based on LabView for Windows

  • Software controller in real time, possible with real controlled system or simulation options
  • Setpoint profiles (programme controller)
  • Display and storage of all process variables
  • Network capability
  • Language switching

Software functionality

  • Process schematics with online display of all process variables
  • User control and parameter setting of the software controllers
  • Manual control of actuators and disturbance feedforward control
  • Recording of step responses for system identification
  • Manual and automatic controller optimisation
  • Stability tests
  • Controlled system simulations for simplified system models

Advantages:

  • Compact benchtop models
  • Ideally suited to multi-user applications
  • Typical control systems from the field of process control such as flow, level, pressure, temperature, speed and position
  • High level of observability of processes based on transparent elements (covers, containers, lines)
  • Richly featured software
  • Computer interface with USB port

Comprehensive experiment programme for each trainer:

  • Control loop analysis
  • Influence of controller parameters on control action and disturbance response
  • Stability of the open and closed loop
  • Controller optimisation

Comprehensive instruction material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

 

pdf download:

 

> RT 010 - RT 060 Fundamentals of Process Control (300kB)

 

> RT 010 - RT 060 Fundamentals of Process Control (2.3MB; leaflet)

 

 

Print
© 2005 G.U.N.T. Gerätebau GmbH