|
|
The system is used in conjunction with the transducer sets CT 300.16, CT 300.17 and the CT 300.18. Each of the sets consists of a pressure transducer and a TDC sensor. It allows pressure measurements to be carried out in the cylinder head of an internal combustion engine and is designed for the CT 300.03, CT 300.04, and CT 300.05 engines. The data is transferred to a PC for further processing. The software produces p-t and p-V diagrams, and also displays the average pressure and the indicated power output.
The system consists of a software and a measuring amplifier for the pressure transducer and TDC sensor. |
 |
Learning Objectives / Experiments |
- familiarisation with and use of an electronic cylinder pressure
indication system
- p-t diagram (top left)
- p-V diagram (bottom)
- pressure curve for gas cycle (top right)
- determination of indicated power output from p-V diagram
|
|
|
|
Features
|
|
|
* Cylinder pressure indication system, suitable for CT 300.03 - CT 300.05 test engines |
|
|
|
| Specification |
[1] cylinder pressure indication system for internal combustion engine
[2] only to be used in conjunction with CT 300.16, CT 300.17 or CT 300.18 transducers
[3] chronological representation of pressure curve against the crank angle in p-t diagram to determine the maximum pressure and to monitor the ignition point and the pressure increase
[4] representation of pressure curve against the standardised piston capacity in p-V diagram to determine the indicated power output
[5] system consists of measuring amplifier and software for Windows XP or Windows Vista |
| Technical Data |
Measuring amplifier: amplification factor 10mbar/mV
TDC sensor trigger distance: 1mm |
| Dimensions and Weight |
LxWxH: 270x250x100mm (amplifier)
Weight: approx. 4kg |
| Required for Operation |
| 230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase |
| Scope of Delivery |
1 measuring amplifier
1 software + USB cable
1 manual |
| Order Details |
063.30009 CT 300.09 Electronic Engine
Indicating System for CT 300
|
|
