Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Water Treatment  |  CE 584
CE 584 Advanced Oxidation Show data sheet (pdf file) Print page
CE 584 - A product from the GUNT 2E range
Technical Description

  In water treatment oxidation processes are used to remove organic substances which are not biodegradable. If the oxidation is by hydroxyl radicals (OH radicals) it is called "advanced oxidation".  A common method for forming hydroxyl radicals is the irradiation of hydrogen peroxide  with UV light. CE 584 demonstrates this process using a discontinuous falling film reactor.
  The falling film reactor consists of a transparent tube which is open at the bottom. At the top of the tube there is a circular channel. Using a pump the raw water enriched with hydrogen peroxide is transported from a tank into the channel. From here the water flows as a thin falling film along the inside wall of the tube back into the tank. This creates a closed water circuit. At the centre of the tube there is a UV lamp. By irradiation of the falling raw water  with UV light hydroxyl radicals form from the  hydrogen peroxide molecules. The hydroxyl radicals oxidate the organic non-biodegradable substances in the raw water. As protection against the radiation the UV lamp is fitted with a protective tube.
  The flow rate and temperature of the water are continuously measured. The temperature is indicated digitally in the switch cabinet. Samples can be taken at the tank.
  Analysis technology is required to evaluate the experiments.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.


Learning Objectives / Experiments

- familiarisation with oxidation with hydrogen peroxide
  and UV light
- recording of degradation curves for the investigation

  of reaction kinetics
- influence of the hydrogen peroxide quantity on the



* Oxidation of organic substances with hydrogen

  peroxide (H2O2) and UV light1
* Discontinuous operation with falling film reactor


[1] advanced oxidation process

[2] use of hydrogen peroxide and UV light
[3] formation of hydroxyl radicals (OH radicals)
[4] falling film reactor with UV lamp
[5] discontinuous operation

[6] flow rate adjustable
[7] measurement of temperature and flow rate
[8] digital temperature indication

[9] protection device against UV radiation


Technical Data

Falling film reactor (tube)
- diameter: 130mm
- height: 1.000mm
- material: glass
UV lamp
- emitted wavelength: 254nm
- power: 120W
- max. flow rate: 360L/h
- max. head: 9m
- capacity: 10L

Measuring ranges
- flow rate: 30...320 L/h
- temperature: 0...50C


Dimensions and Weight
LxWxH: 1.510x790x1.900mm
Weight: approx. 170kg
Required for Operation

230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase

Scope of Delivery

1 trainer
2 buckets

2 beakers
1 set of instructional material

Order Details
083.58400  CE 584  Advanced Oxidation
© 2005 G.U.N.T. Gerätebau GmbH