 |
|
|
|
 |
FL 140
Stress and Strain Analysis on a Thick-Walled Cylinder
Triaxial stress state in cylinder wall; cylinder with strain gauge application on surface and in wall
|
 |
FL 130
Stress and Strain Analysis on a Thin-Walled Cylinder
Determination of axial and circumferential stress from measured strains; cylinder with strain gauge application as vessel
|
 |
FL 151
Multi-Channel Measurement Amplifier
Processing of analogue strain gauge measuring signals for FL 120 - FL 140 and for GUNT trusses
|
 |
CE 105
Corrosion Studies Unit
Easy to observe experiments on corrosion and corrosion protection using specimens made of four different materials
|
 |
CE 271
Multi-Head Diaphragm Pump
Metering pump with 3 pump heads
|
 |
CE 272
Slide Vane Rotary Vacuum Pump
Recording of vacuum generation over time
|
 |
ET 500
Two-Stage Piston Compressor
Two-stage compressor with intercooler
|
 |
MT 140.02
Assembly Exercise: Piston Compressor
Practical assembly of an industrial compressor, using simple tools and jigs
|
 |
MT 140.01
Assembly Exercise Piston Compressor: Functional Test
Test bed for MT 140.02 or MT 140: evaluation of assembly is possible
|
 |
ET 860
Steam Boiler Safety & Control
Familiarisation with the design and function of boiler safety devices
|
 |
WL 315C
Heat Exchanger Trainer
Comparison of different heat exchanger types
|
 |
HM 700.04
Cutaway Model: Straight-Way Valve
Commercial fitting as cutaway model
|
 |
HM 700.05
Cutaway Model: Corner Valve
Commercial fitting as cutaway model
|
 |
HM 700.06
Cutaway Model: Angle Seat Valve
Commercial fitting as cutaway model
|
 |
MT 156
Assembly Exercise: Wedge Gate Valve and Angle Seat Valve
Practical exercise based on the assembly of a gate valve and an angle seat valve
|
 |
MT 157
Assembly Exercise: Butterfly Valve and Non-Return Valve
Practical exercise based on the assembly of a butterfly valve and a non-return valve
|
 |
HM 700.08
Cutaway Model: Pressure Reducing Valve
Commercial fitting as cutaway model
|
 |
MT 158
Assembly Exercise: Ball Valve and Shut-off Valve
Practical exercise based on the assembly of a ball valve and a globe valve
|
 |
MT 162
Hydraulic Valves and Fittings Test Stand
Final testing for the GUNT MT 154, MT 156, MT 157 and MT 158 assembly projects
|
 |
HL 960
Assembly Station: Pipes and Valves and Fittings
Practically oriented assembly of real piping and system installations; in conjunction with HL 960.01: operational testing of the pipe network
|
 |
HM 700.11
Cutaway Model: Straight-Way Plug Valve
Commercial fitting as cutaway model
|
 |
HL 960.01
Assembly and Alignment of Pumps and Drives
Installing a pump in a system
|
 |
HM 700.12
Cutaway Model: 3-Way Plug Valve
Commercial fitting as cutaway model
|
 |
RT 395
Maintenance of Valves and Fittings and Actuators
Comparison of 4 different actuators
|
 |
HM 700.13
Cutaway Model: Ball Valve
Commercial fitting as cutaway model
|
 |
RT 396
Pump and Valves and Fittings Test Stand
Plotting characteristics of industrial valves and fittings
|
 |
HM 700.14
Cutaway Model: Safety Valve
Commercial fitting as cutaway model
|
 |
MT 180
Assembly & Maintenance Exercise: Centrifugal Pump
Pump according to DIN 24255
|
 |
MT 181
Assembly & Maintenance Exercise: Multi-Stage Centrifugal Pump
Four-stage, normally primed centrifugal pump
|
 |
MT 182
Assembly & Maintenance Exercise: Screw Pump
Three-spindle screw pump with one driving spindle and two delivery spindles
|
 |
MT 183
Assembly & Maintenance Exercise: Diaphragm Pump
Flow setting by manual stroke length adjustment
|
 |
MT 184
Assembly & Maintenance Exercise: Piston Pump
Piston pump with air vessel to compensate for pressure surges
|
 |
MT 186
Assembly & Maintenance Exercise: Gear Pump
Quiet running owing to the plastic / metal gear wheel pairing
|
 |
HM 365.11
Centrifugal Pump Module
Characteristics of a standard pump
|
 |
VS 102
Cutaway Model: Resilient Seated Gate Valve
Cutaway model from water and gas mains
|
 |
HM 365.14
Series / Parallel Pumps Module
Investigation of the pump characteristic of series and parallel configurations of 2 pumps
|
 |
VS 103
Cutaway Model: Screw Down Valve
Cutaway model from water and gas mains
|
 |
HM 365.15
Side Channel Pump Module
Investigation of the pump characteristic of a side channel type centrifugal pump
|
 |
VS 104
Cutaway Model: Changeover Valve
Cutaway model from water and gas mains
|
 |
HM 365.17
Piston Pump Module
Characteristics of a reciprocating pump
|
 |
HM 365.10
Water Pump Supply Module
under construction!
|
 |
VS 106
Cutaway Model: Backflow Preventer
Cutaway model from water and gas mains
|
 |
HM 365
Universal Drive and Brake Unit
Core component for experiments on various engines and machines
|
 |
VS 107
Cutaway Model: Non-Return Butterfly Valve
Cutaway model from water and gas mains
|
 |
VS 109
Cutaway Model: Strainer
Cutaway model from water and gas mains
|
|
