Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Power Engines and Machines  |  ET 805
ET 805 Steam Power Plant 20kW with Process Control System Show data sheet (pdf file) Print page
Steam Power Plant
Technical Description

  The ET 805 steam power plant is particularly designed for training purposes in the area of power plant technology and thermal system tests. Due to the size and complexity of the system the operating behaviour in many aspects corresponds to that of actual large scale plants and offers a training that is as close to the real thing as possible.
  A steam boiler heated by gas/oil and an upstream electrically heated superheater create hot steam for a single-stage industrial turbine. The turbine powers a synchronous generator which can be operated in parallel mains or isolated operation. All relevant parameters are recorded by sensors and displayed in the process control system (PCS). The operation of the system can be monitored completely from the PCS. The control system operates based on modern touch screen technology. The system records critical operating states in alarm lists and warning messages and the affected system components automatically go into emergency-shutdown.
  The system consists of four individual assemblies:

steam generator assembly with superheater and feed water treatment, steam turbine assembly with generator and condenser, wet cooling tower and a control station with PCs and touch screens. Facilitates flexible adaptation to lab space.

  With the electrical superheater, the steam temperature can be controlled precisely. The feed water treatment consists of an ion exchanger, a metering pump for chemicals and a heated feed water tank for pre-heating and degassing. The steam turbine is equipped with an electronic speed control via PLC and a digital synchronisation unit. A mechanical overspeed protection with quick-action valve protects the turbine from overspeed.
 

Learning Objectives / Experiments

- set-up and function of a complete steam power

  plant for power generation
- start-up, operation, shut-down, service and

  maintenance of a steam power plant
- modern system control via PLC
- pressure, level and temperature control circuits
- recording and evaluation of the most important

  operating parameters
- determination of input and output power,

  component and system efficiency, specific fuel

  consumption

Features

* Modern, digital PCS system control, based on

  CAN bus and PLC1

* Monitoring and control of the system via a control

  station with touch screen1

* Synchronous generator, 20kVA, with modern

  synchronization unit (PPU) for parallel mains and

  isolated operation

Available accessories
ET 805.50 -- Throttling Calorimeter
Alternative products
ET 830 -- Steam Power Plant, 1,5kW
ET 833 -- Steam Power Plant 1,5kW with Process Control System
Overview
ET 805 Steam Power Plant 20kW
Specification

[1] laboratory-sized steam power plant
[2] gas/oil heated steam boiler with electrical superheater
[3] single-stage industrial steam turbine with double Curtis wheel
[4] electronic speed control with electropneumatic control valve
[5] 20kVA synchronous generator with PPU synchronisation device for parallel mains or isolated operation
[6] water-cooled condenser with cooling water circuit and wet cooling tower
[7] feed water treatment with ion exchanger and metering pump for chemicals
[8] modern, digital PCS system control with process control software for monitoring, control and data acquisition
[9] control station with complete instrumentation on modern LCD monitors, touch screen operation

 

Technical Data

Steam boiler
- max. steam output: 600kg/h at 13bar
- max. heat output: 393kW
- max. fuel consumption: 36,8kg/h
Superheater, capacity: 32kW, 250C
Single-stage Curtis turbine with 2C wheel and electronic speed control
- max. power output: 20kW at 3.000min-1
- Synchronous generator: 20kVA, 400V, 50/60Hz
Water-cooled condenser
- cooling capacity: 389kW
- transfer area: 5,5m
Cooling tower, max. cooling capacity: 540kW

 

Dimensions and Weight

LxWxH: 3.100x2.000x2.500mm (steam generator)
LxWxH: 2.400x2.000x2.500mm (steam turbine)

LxWxH: 1.620x1.620x2.300mm (cooling tower)
Weight: approx. 4.500kg

Required for Operation
400V, 50/60Hz, 3 phases
Water supply 1,5m/h
Scope of Delivery
1 steam generator assembly, 1 steam turbine assembly, 1 wet cooling tower, 1 control station, 1 set of tools, 1 CD with PLC and GUNT software, 1 set of instructional material
Order Details

061.80500  ET 805  Steam Power Plant 20kW with

                                Process Control System


Print
© 2005 G.U.N.T. Gerätebau GmbH