Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Statics  |  WP 960
WP 960 Beam on 2 Supports: Shear Force & Bending Moment Diagrams Show data sheet (pdf file) Print page
Beam on 2 Supports: Shear Force & Bending Moment Diagrams
Technical Description

Statics observes the effect of forces on a rigid body, ignoring any possible deformations which may occur in the process. The forces are in equilibrium. In reality, forces always produce an effect in the component, such as deformation. These effects are investigated in the science of the strength of materials. The methods applied in strength of materials serve to design components so that they cannot be deformed or destroyed by applied forces.
  A simple example is a statically determinate bearing-mounted beam subjected to point loads. The reactions are determined from the conditions of equilibrium. To investigate the effect of the point loads in the beam, it is notionally split into two segments. Applying the method of sections, the internal forces and moments are plotted onto the two segments and calculated by way of conditions of equilibrium.
  WP 960 includes a beam mounted on two supports. The beam is cut at one point. At that point there is a low-friction hinge with two degrees of freedom. Two force gauges determine the internal reactions to the externally applied forces at the section. The shear force is recorded and displayed directly by a force gauge. The bending moment occurring at the section is recorded by a second force gauge acting on a fixed lever arm. This force readout, divided by 10, gives the bending moment in Nm.

  Adjuster nuts on the two force gauges are used to align the beam horizontally and balance out any deflection.

  In evaluating the experiment it becomes clear that the shear force, as

opposed to the bending moment, is mostly negligible when designing components.
  The various elements of the experiment are clearly laid-out and housed securely in a storage system. The complete test setup is arranged on a frame.
  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

Learning Objectives / Experiments
- Calculation of the reactions arising from the
  static conditions of equilibrium
- Application of the method of sections to calculate
  the internal forces and moments
  * under a point load 
  * under multiple point loads
- Calculation of the shear force diagram
- Calculation of the bending moment diagram
- Comparison of calculated and measured values for
  shear force and bending moment
* Application of the method of sections to determine
  internal reactions of the beam1
* Direct indication of shear force and bending moment
  at a section on the beam
Available accessories
WP 300.09 -- Laboratory Trolley
Alternative products
WP 961 -- Beam on Two Supports: Shear Force Diagram
WP 962 -- Beam on Two Supports: Bending Moment Diagram
[1] Determination of shear force and bending moment on beam mounted on 2 supports
[2] Measurement of shear force and bending moment in beam by low-friction hinge with 2 degrees of freedom
[3] Position of hinge at 1/3 span
[4] 2 bearing supports 
[5] Loading of beam by 1 to 3 point loads
[6] Force gauges to indicate shear force and determine bending moment
[7] Bending moment determined by force measurement and lever arm
[8] Adjuster nuts for horizontal alignment of beam
[9] Steel rule to determine positions of point loads
[10] Storage system to house the components
Technical Data
- total length: 1000mm
- span: 800mm
Measuring ranges
- bending moment via force gauge and lever arm
  lever arm: 100mm
  Force gauge: -100...+100N
  bending moment: -10...+10Nm
- shear force: -50...+50N
- steel rule: 1000mm, graduations: 1mm
Set of weights
- 3x 1N (hangers)
- 12x 1N
- 9x 5N
- max. weight load per hanger: 20N
Dimensions and Weight
l x w x h: 1400 x 320 x 600 mm
Weight: approx. 35 kg
Scope of Delivery
1 experimental unit
3 sets of weights
1 steel rule
1 storage system
1 set of instructional material
Order Details

020.96000  WP 960  Beam on 2 Supports: Shear

                   Force & Bending Moment Diagrams

© 2005 G.U.N.T. Gerätebau GmbH