Strain gauges are used extensively in sensor systems to detect forces, moments and deformations.

  The FL 100 experimental unit provides a wide-ranging introduction to the fundamentals of measurement by strain gauges. Three test specimens for tension, bending and torsion are each fitted with four strain gauge measuring points. The strain gauges are wired in the full bridge. The specimens are loaded incrementally allowing for the strain reading to be sequentially monitored.

  The specimens can be inserted quickly and precisely into the frame. The strain gauge measuring range is protected by a Plexiglas cover, which also makes it clearly visible for inspection purposes. The measurement amplifier supplies the bridge supply voltage, and displays the load-dependent "bridge detuning" digitally in voltage values. The digital display also features a zero balancing function to allow for any preloading.

  The various elements of the experiment are clearly laid-out and housed securely in a box.

  Three additional tension bars are available as accessories, in brass (FL 100.01), copper (FL 100.02) and aluminium (FL 100.03), enabling the modulus of elasticity to be ascertained in experiments.

  The well-structured instructional material sets out the fundamentals and

provides a step-by-step guide through the experiments.
 

- Fundamentals of measuring with strain gauges
- Strain gauge types and application techniques
- Calculation of the mechanical deformations under
  tension, bending and torsion
- Correlation between mechanical strain and
  electrical resistance in a strain gauge

With FL 100.01, FL 100.02, FL 100.03
- Determination of the modulus of elasticity for
  various materials from the measurement data of a
  tensile test