Home           Products           Company           Contact us     
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Products  |  Fluid Mechanics  |  Examples of Transient Flow  |  HM 143
HM 143 Transient Drainage Processes in Storage Reservoirs Show data sheet (pdf file) Print page
Technical Description

  Transient drainage processes are taken into consideration when deciding on the dimensions of storage reservoirs. The processes occur for example, in rainwater retention basins and dams.

  The main purpose of the rainwater retention basin is to delay the drainage process by temporary intermediate storage. Dams are used as permanent storage reservoirs in the water supply, in energy conversion, or in flood protection. The water rises before it is fed over an overflow.
  The drainage processes from reservoirs is realised by pipelines, tunnels or other means. A surge chamber prevents water hammers in pipes and fittings in the event of rapid changes in flow.
  HM 143 is used to demonstrate transient drainage processes from storage reservoirs and how a surge chamber works. The trainer includes a basin with adjustable weir and a second, deeper-lying basin with overflow and drainage line. A surge chamber is installed in the drainage line.
  In the "rainwater retention basin" experiment basin A simulates a drainage channel with gate. In basin B, the retention basin, the discharge is adjusted by using valves in the drainage line. This illustrates typical delayed drainage processes.
  In the second experiment, the transient drainage processes are shown in two storage reservoirs, one behind the other. In this experiment the weir is used as a free overfall weir.
  In the "surge chamber" experiment a water hammer is produced by rapidly closing a gate in the drainage line. The vibration can be seen as oscillation of the water level in the surge chamber.
  The pressure fluctuations in the basins and at the surge chamber are detected by pressure sensors and displayed using the GUNT software.
  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.
 

Learning Objectives / Experiments

- demonstrating transient drainage processes in a

  rainwater retention basin
- demonstrating transient drainage processes in two

  water reservoirs located one behind the other and

  determining the discharge
- recording vibrations of the surge chamber and

  measure natural frequency
- recording and displaying pressure fluctuations

Features

* Investigation of transient drainage processes in

  storage reservoirs1
* Simulation of rainwater retention basin1
* Transparent surge chamber for observing

  vibrations1
* Software for displaying the pressure curves

  and course of the water levels

Alternative products
HM 156 -- Water Hammers and Surge Chamber
Specification

[1] transient drainage processes in storage reservoirs
[2] functioning of a surge chamber
[3] "rainwater retention basin" experiment: basin A as drainage channel, basin B as rainwater retention basin, rectangular weir as gate
[4] "consecutive storage reservoirs" experiment: basin A and basin B are used as storage reservoirs, rectangular weir as overfall weir
[5] "surge chamber" experiment: transparent pipe as surge chamber in drainage line of basin B
[6] gate in the drainage line for generating water hammers
[7] pressure sensors at both basins and the surge chamber capture the pressure fluctuations
[8] representation of the pressure curves and course of the water levels with GUNT software
[9] GUNT software for data acquisition via USB under Windows Vista or Windows 7

 

Technical Data

Basin A: LxWxH: 900x900x300mm
- material: stainless steel
- rectangular weir according to Rehbock, adjustable
  as gate, gate opening: 1,5mm
  as overfall weir, weir height: 215mm,
  overflowed width: 60mm
Basin B: LxWxH: 900x900x300mm
- material: stainless steel
- overflow: 250mm
Surge chamber
- material: PMMA
- di: 62mm
- height: 1800mm
 

Measuring ranges
- pressure: 2x 0...100mbar, 1x 0...200mbar
- flow rate: 300...3.300L/h

 

Dimensions and Weight
LxWxH: 1.300x1.200x2.100mm
Weight: approx. 140kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Water connection, drain
Scope of Delivery
1 trainer
1 CD with GUNT software
1 set of instructional material
Order Details

070.14300  HM 143  Transient Drainage

                                  Processes in Storage

                                  Reservoirs


Print
© 2005 G.U.N.T. Gerätebau GmbH