Home           Products           Company           Contact us     
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Products  |  Fluid Mechanics  |  Steady Flow of Compressible Fluids  |  HM 230
HM 230 Flow of Compressible Fluids Show data sheet (pdf file) Print page
Technical Description

  Compressible fluids change their density due to pressure change in the flow. Flows with velocities less than Ma 0,3 are regarded as incompressible and the change in density is negligible. At higher velocities, the density has to be included in calculations. These conditions must be taken into consideration when designing e.g. turbo compressors, jets and fast planes.
   The HM 230 experimental unit is used to investigate air flow in various ranges of velocity.
  A radial fan with infinitely variable speed control sucks in air from the environment. At the intake the air flow is accelerated in a measuring nozzle. Further down the measurement section the air flows through interchangeable measuring objects. Sucking in the air and the arrangement of the measuring objects on the suction side of the fan minimise turbulence when flowing into the measuring objects. All measuring objects are made of transparent material and provide excellent insight into the inner structure.
  Pressure losses are studied in a pipe elbow, various pipe sections and a nozzle with sudden enlargement. The nozzle with gradual enlargement (de Laval nozzle) provides an introduction to the topic of transonic flow. The volume flow is measured in an orifice using a differential pressure manometer. The orifice is fitted with four interchangeable orifice disks for different measurement ranges. The fan's characteristic curve can also be recorded by using a throttle valve.

  The measured values for volume flow, pressure and speed are captured by sensors and displayed digitally.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

Learning Objectives / Experiments

- pressure losses in pipes and pipe elbows
- flow in convergent/divergent nozzles
- supersonic flow in the de Laval nozzle
- determine the speed of sound in air
- compare calculation methods for incompressible

  and compressible flow
- use complete continuity equation
- determine mass flow using nozzle and volume flow

  using orifice
- record calibration curve for orifice
- record fan characteristic curve at different mass

  flows and speeds

Features

* Investigation of flow in compressible fluids1
* Varied range of experiments for studying

  incompressible, subsonic and transonic flow1

* de Laval nozzle generates velocities up to Ma 1

Alternative products
HM 172 -- Supersonic Wind Tunnel with Schlieren Optics
HM 220 -- Airflow Study Unit
HM 225 -- Aerodynamics Trainer
HM 240 -- Principles of Airflow
Overview
HM 230 Flow of Compressible Fluids
Specification

[1] investigate flow of compressible fluids
[2] incompressible, subsonic and transonic air flow
[3] variable speed on the radial fan for adjusting the mass flow
[4] minimised turbulence by sucking in air and optimum arrangement of the measuring objects
[5] transparent measuring objects with connectors for pressure measurement provide insight into the internal structure
[6] measuring nozzle for determining the mass flow
[7] pressure losses in incompressible flow in pipe elbows and various pipe sections
[8] pressure curve at subsonic and transonic nozzle flow
[9] orifice for determining volume flow by differential pressure measurement
[10] record fan characteristic curve using a throttle valve
[11] digital displays for volume flow, speed and pressure

 

Technical Data

Radial fan
- max. speed: 37.000min-1
- max. intake air flow: 206m/h
- max. head: 271mbar

- max. power consumption: 1,6kW
Measuring objects
- pipe section: 1m, diameter: 16, 24, 34mm
- 90 pipe elbow
- nozzle with sudden enlargement
- nozzle with gradual enlargement (de Laval

  nozzle)
- orifice with orifice disks, D: 12, 19, 25, 32mm
- throttle valve, D: 34mm
 

Measuring ranges
- speed: 0...99.999min-1
- volume flow: 0...0,0500m/s
- pressure: 1x 0...25mbar; 1x 0...200mbar;

                   1x 0...1.000mbar

 

Dimensions and Weight
LxWxH: 1.750x600x345mm
Weight: approx. 50kg
Required for Operation
230V, 50/60Hz/CSA, 1 phase or 120V, 60Hz/CSA, 1 phase or 230V, CSA, 3 phases
Scope of Delivery

1 experimental unit
1 set of measuring objects

1 set of tools
1 set of instructional material

Order Details
070.23000  HM 230  Flow of Compressible Fluids
Print
© 2005 G.U.N.T. Gerätebau GmbH