Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Power Engines and Machines  |  ET 830
ET 830 Steam Power Plant, 1,5kW Show data sheet (pdf file) Print page
Technical Description

  The ET 830 was specially designed for technical training in the area of power plant engineering, and power engines and machines, and as a result offers numerous experiments. An oil-heated once-through boiler generates wet steam, a superheater provides superheated steam. The turbine is loaded with a generator, the energy generated is returned to the electricity mains. After the turbine, the steam is condensed and fed back to the boiler. All relevant parameters are measured using sensors and displayed on a clearly laid out switch panel as measured values. The switch panel contains a clearly laid out process schematic for the system. Data from the sensors can be transferred directly to a PC for further processing. The system is monitored and controlled using a PLC.
  A fuel tank and feed water tank are integrated into the system to form a self-contained unit. The feed water circuit is equipped with a complete feed water treatment unit that comprises a regenerating ion exchanger and chemical metering.

  The plant is supplied with comprehensive documentation. It has been built in accordance with legal safety requirements and includes the stipulated safety devices. Due to the usage of an instantaneous boiler, rapid generation of steam is possible (t approx. 5min). The boiler is type approved and does not need specific permission for operation

according to German regulations.
  A supply of cooling water (10m/h), or the cooling tower ET 830.01, is required for operation. 

 

Learning Objectives / Experiments

- steam power plant and its components
- simple feed water treatment
- starting / operation / running down a steam power

  plant
- closed steam-water circuit
- determination of, among others
  * boiler efficiency
  * mechanical/thermal efficiency of a turbine
  * condenser efficiency
  * specific fuel consumption of the system

Features

* Complete, fully functional, laboratory scale steam

  power plant1
* Closed steam-water circuit1
* Monitoring and control of the system using a PLC

Available accessories
ET 830.01 -- Cooling Tower
Alternative products
ET 805 -- Steam Power Plant 20kW with Process Control System
ET 833 -- Steam Power Plant 1,5kW with Process Control System
ET 851 -- Steam Turbine Module
Overview
ET 810 - ET 851 Steam Power Plants
Specification
[1] laboratory scale steam power plant
[2] oil-heated once-through boiler with electric superheater
[3] steam turbine, vacuum or exhaust operation
[4] DC generator as turbine load
[5] water-cooled condenser
[6] feed water treatment unit
[7] GUNT software for data acquisition via USB under Windows Vista or Windows 7
[8] monitoring and control of the system using an integrated PLC
[9] cooling water connection 10m/h or cooling tower ET 830.01 required
 
Technical Data

Boiler

- thermal rating: 100kW

- max. amount of steam: 200kg/h at 10bar

- nominal steam amount: 120kg/h at 10bar

- max. fuel consumption: 10kg/h
Superheater

- output: 5,1kW, 240C
Single-stage impeller turbine with 2C wheel and hydraulic speed controller

- output: max. 1,5kW at 3.000min-1
Water-cooled condenser

- cooling capacity: 100kW

- surface area: 2,2m

 

Dimensions and Weight
LxWxH: 3.450x2.000x2.300mm
Weight: approx. 2.250kg
Required for Operation
400V, 50/60Hz, 3 phase or 230V, 60Hz, 3 phase
Cooling water supply 10m/h
Scope of Delivery

1 experimental plant

1 GUNT software CD + USB cable

1 manual

Order Details
061.83000  ET 830  Steam Power Plant, 1,5kW
Print
© 2005 G.U.N.T. Gerätebau GmbH