Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Mechanical Process Engineering  |  CE 115
CE 115 Fundamentals of Sedimentation Show data sheet (pdf file) Print page
Technical Description

  Sedimentation is often used to clarify suspensions. In the process, the solid particles move downwards in a liquid owing to their density.

  Using CE 115, the sedimentation processes in different suspensions can be investigated and compared. Five transparent cylindrical tanks are provided for the purpose. The suspensions are prepared in measuring cups, poured into the removable tanks, and mixed by shaking. The tanks are then mounted vertically on the experimental unit. To aid observation of the sedimentation process, the tanks are backlit.

Learning Objectives / Experiments

- determination and comparison of the settling velocities of solids in

  suspensions dependent on the solid density and concentration and

  the liquid density and viscosity
- influence of flocculent on the settling velocity

* Separation of suspensions by sedimentation
Alternative products
HM 142 -- Separation in Sedimentation Tanks

[1] experiments in the fundamentals of sedimentation
[2] 5 transparent tanks with scale for comparison of the settling velocities of solids in various suspensions
[3] tanks removable for filling, mixing and cleaning
[4] tanks backlit by fluorescent tubes to aid observation
[5] 3 measuring cups for preparation of suspensions
[6] pycnometer to determine the density of the liquids and solids
[7] stopwatch to record the sedimentation time
[8] recommended accessories: balance, flocculent


Technical Data

- length: 1.000mm
- inside diameter: 42mm
- scale division: 1mm
- material: PMMA
Fluorescent tubes
- power: 6x 18W
Measuring cups
- capacity: 2.000ml
- scale division: 50ml
- resolution: 1/100sec


Dimensions and Weight
LxWxH: 750x460x1.160mm
Weight: approx. 53kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery
1 experimental unit
3 measuring cups
1 stopwatch
1 pycnometer
1 set of instructional material
Order Details

083.11500  CE 115  Fundamentals of


© 2005 G.U.N.T. Gerätebau GmbH