Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Components and Calibration  |  RT 350
RT 350 Operation of Industrial Controllers Show data sheet (pdf file) Print page
Technical Description

  This experimental unit familiarises students with the operation and function of a state-of-the-art industrial controller.

 

  The controller has freely accessible inputs and outputs. Defined input levels and step signals can be produced with a signal generator. A digital voltmeter is used to measure the input and output signals. A simple first order lag is simulated to allow the response and stability of a closed control loop to be investigated. All signals are accessible via lab jacks so a standard x/y plotter or line recorder can be used. It is also possible to control external controlled system models with this controller. As well as manual configuration and parameter setting with keys, the controller can be configured (configuration software supplied) from a PC over an RS232 interface.

 

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 
Learning Objectives / Experiments

- basic concept of a industrial controller
  * operator control levels
  * parameter level
  * configuration level
- learning about basic terminology and methods of

  process control
  * static and dynamic transfer function
  * step response
  * reference variable step
  * closed control loop
- setting controller parameters
  * setting input and output channels
  * scaling displays
  * using PC-based configuration tools

Features
* Familiarisation with an industrial controller1
* Digital controller with freely selectable parameters1
* Simulation of controlled systems1
* Configuration software
Alternative products
RT 010 -- Training System: Level Control, HSI
RT 360 -- Networking of Industrial Controllers
RT 370 -- Setup of Field Bus Systems
RT 380 -- Optimization of Control Loops
Overview
RT 350 - RT 380 Trainers for Process Automation
Specification

[1] experimental unit for industrial controllers
[2] digital controller, configurable
[3] signal generator with potentiometer
[4] digital voltmeter
[5] first order lag controlled system simulator
[6] all variables accessible as analogue signals at lab jacks
[7] configuration software

[8] RS232 interface 
 

Technical Data

Controller
- configurable as P, PI or PID controller
- proportional gain Xp: 0...999,9%
- integral action time Tn: 0...3.600s

- derivative time Tv: 0...1.200s
- 2 inputs, 1 output
- RS232 interface for configuration on PC
Voltmeter
- measuring range: 0...20V
- resolution: 10mV
Reference variables generator
- 2 voltages selectable
- output voltage: 0...10V
Controlled system simulator
- controlled system type: first order lag
- time constant: 20s
- controlled system gain: 1...10
- process variables as analogue signals: 0...10V
Connection of external instruments (e.g. oscilloscope, line recorder) via lab jacks

System requirements: Windows XP or Windows Vista

 

Dimensions and Weight
LxWxH: 370x330x150mm
Weight: approx. 5kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery
1 experimental unit
1 configuration software CD
1 interface cable
1 set of lab cables
1 set of instructional material
Order Details

080.35000  RT 350  Operation of Industrial

                                 Controllers


Print
© 2005 G.U.N.T. Gerätebau GmbH