Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Chemical Process Engineering  |  CE 310
CE 310 Chemical Reactors Trainer Show data sheet (pdf file) Print page
Technical Description

The properties of different chemical reactors can be investigated by performing a saponification reaction using this trainer. The contact time and reaction temperature can be varied. Their influence on the conversion of reactants is observed in the respective reactor. The reactors are available as accessories. The unit contains two supply tanks for the liquid chemicals. Two variable speed diaphragm pumps pump the reactants through the reactor. Reactant conversion and reaction temperature are measured with a combined conductivity and temperature measuring unit. It is also possible to use PC data acquisition. The reaction is moderated using a controlled hot water circuit. The resulting reaction product is collected in a stainless steel tray in the unit.

Learning Objectives / Experiments

In conjunction with the various types of reactors available as accessories in the CE 310 series, comprehensive experiments on the reaction kinetics and on the conversion of reactants during a saponification reaction can be performed. Specifically, the following experiments can be performed:
- Variation of contact time of the two chemicals
- Variation of reaction temperature
- Adiabatic reaction in a batch reactor
- Isothermal reaction in a batch reactor

Features
* Basic unit to study and compare various reactors
  using the example of a saponification
* High precision, combined conductivity and reaction
  temperature measurement
* Usage of industrial diaphragm pumps
Available accessories
CE 310.01 -- Continuous Stirrer Tank Reactor
CE 310.02 -- Tubular Reactor
CE 310.03 -- Stirred Tanks in Series
CE 310.04 -- Batch Reactor
CE 310.10 -- PC Data Acquisition System
Alternative products
CE 100 -- Tubular Flow Reactor
Specification
[1] Benchtop unit to study the kinetics of reaction kinetics of various types of chemical reactors based on saponification
[2] Chemicals pumped using 2 industrial diaphragm pumps
[3] Reaction of 2.3% sodium hydroxide with ethyl acetate
[4] High precision combined measuring unit for conductivity 0...200mS and reaction temperature 0...100C
[5] Hot water circuit with centrifugal pump for moderating the reaction
[6] Electrical heater, 2kW
[7] Electronic two-point controller
[8] Self-sealing quick action hose couplings
Technical Data
Diaphragm pump, adjustment range: 0...100%, pump flow rate max. 600ml/min
Conductivity measuring range: 0...200mS
Temperature measuring range: 0...100C
Heater: 2kW, electron. two-point controller
Centrifugal pump
Chemicals used:
Ethyl acetate 5%, sodium hydroxide 2.3%
Dimensions and Weight
l x w x h : 1300 x 680 x 630 mm
Weight : approx. 90 kg
Required for Operation
230V, ~50Hz
Scope of Delivery
1 demonstration unit, complete
1 instruction manual

Supplied without reactors and without
data acquisition software
Order Details
083.31000 CE 310 Chemical Reactors Trainer
Print
© 2005 G.U.N.T. Gerätebau GmbH