Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Fundamentals of Control Engineering  |  RT 020
RT 020 Training System: Flow Control, HSI Show data sheet (pdf file) Print page
Technical Description

  This compact experimental unit offers every opportunity to learn the fundamentals of control engineering through experimentation on a flow control system. The experimental set-up is mounted in a housing which accommodates all the electronics.

 

  A piping system with two flowmeters is supplied with flow by a speed-controlled pump from the transparent storage tank. The rotameter offers the advantage that the flow rate can be observed directly at any time. The flow rate is measured by a turbine wheel flow sensor. The sensor output signal is sent to the software controller. The output signal from the controller influences the setting of an electromagnetic proportional valve. To investigate the influence of disturbance variables, the pump speed can be altered by way of the software.

  The powerful state-of-the-art software is an integral part of the training system, embodying the principle of hardware/software integration (HSI). It enables the experiments to be conducted and evaluated in a user-friendly manner. The software has network capability. The link between the experimental unit and the PC is made via a USB port.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

Learning Objectives / Experiments

- fundamentals of control engineering based on the

  example of a rapid flow control system
- open loop control response

- effects of different controller parameters and

  methods on the response of the closed loop

  system 
- recording of step responses 
  * reference variable
  * disturbance variable
- controller optimisation
- software-based controlled system simulation
  * comparison of different controlled system

    parameters

Features

* Experimental unit with clear flow control system 1
* Extensive range of experiments on fundamentals of

  control engineering1
* State-of-the-art software for all experimental units

  of the RT 010 - RT 060 series, with extensive

  controller and recorder functions1
* Software-based simulation of the controlled system

Alternative products
RT 010 -- Training System: Level Control, HSI
RT 030 -- Training System: Pressure Control, HSI
RT 040 -- Training System: Temperature Control, HSI
RT 050 -- Training System: Speed Control, HSI
RT 060 -- Training System: Position Control, HSI
RT 624 -- Flow Control Demonstration Unit
RT 674 -- Flow / Level Control Demonstration Unit
Overview
RT 010 - RT 060 Fundamentals of Process Control
Specification

[1] experimental unit for control engineering experiments
[2] flow control system with variable-area flowmeter
[3] electromagnetic proportional valve as actuator

[4] turbine wheel flow sensor
[5] generation of disturbance variables by altering pump speed
[6] software-based controlled system simulation
[7] process schematic on front panel

[8] networkable LabVIEW software via USB under Windows XP or Windows Vista

 

Technical Data

Storage tank

- capacity: approx. 3L
Pump
- power consumption: 18W
- max. flow rate: 8L/min
- max. head: 6m
Rotameter: 20...250L/h
Proportional valve: Kvs: 0,7m/h
Flow sensor: 0,5...3L/min
Software controller configurable as P, PI, PID and switching controller

Software
- process schematic with controller type selection

  (manual, continuous controller, two- or three-point

  controller, programmer)
- time functions
- simulation function
- disturbance variable input

 

Dimensions and Weight
LxWxH: 600x440x560mm
Weight: approx. 19kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz/CSA, 1 phase
Scope of Delivery

1 experimental unit

1 hose
1 software package, complete with USB cable
1 handbook: fundamentals of control engineering

   (RT 010 - RT 060)
1 instruction manual for RT 020

Order Details

080.02000  RT 020  Training System:

                                Flow Control, HSI


Print
© 2005 G.U.N.T. Gerätebau GmbH