Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Renewable Energies  |  ET 250
ET 250 Solar Module Measurements Show data sheet (pdf file) Print page
ET 250 - A product from the GUNT 2E range
Technical Description

  Photovoltaic solar modules convert sunlight directly into electrical current and are therefore an ideal component for renewable energy supply. Typical solar modules from the field of photovoltaics are made of several silicon solar cells connected in series.
  The ET 250 trainer contains two such solar modules. The tilt of the modules can be adjusted. Cables can be used to connect the two modules in series or in parallel. A slide resistor simulates varying loads. Thus the slide resistor makes it possible to record current-voltage curves.
  The separate measuring unit provides displays for all relevant variables. Two power resistors in the measuring unit are used to expand the measuring range for measurements at low illuminance. Sensors on the solar module detect illuminance and temperature.
  In order to ensure there is sufficient illuminance, the trainer should be operated with sunlight or the optionally available HL 313.01 Artificial Light Source.
  The well-structured instructional material sets out the basic principles and provides a step-by-step guide through the experiments. 

 

Learning Objectives / Experiments

- Physical behaviour of solar modules under

  a variety of effects
  * illuminance
  * temperature
  * shading
- Familiarisation with key parameters
  * short-circuit current
  * open-circuit voltage
  * current at maximum output
  * voltage at maximum output
- Relationship between module tilt, illuminance,

   short-circuit current and electrical output
- Recording a module's current-voltage curve
- Determining the efficiency
- Connection types for the modules
  * series connection
  * parallel connection
- How cells covered by shadow affect the current-voltage curves

Features

* 2 solar modules on mobile frame1

* Two pivotable solar modules on mobile frame1
* Series and parallel connection1
* Adjustable electrical load1
* Measuring unit for current, voltage, illuminance and 

   temperature1
* Suitable for sunlight and artificial light1
* Expandable with ET 255 Using Photovoltaics:

   Grid-Connected or Stand-Alone trainer

Available accessories
ET 250.01 -- Photovoltaic in Grid-connected Operation
ET 250.02 -- Stand Alone Operation of Photovoltaic Modules 
ET 255 -- Using Photovoltaics: Grid connected or Stand-alone
HL 313.01 -- Artificial Light Source
Specification

[1] Trainer for solar module measurements
[2] Two pivoting solar modules on mobile frames
[3] Series and parallel connection options
[4] Slide resistor as variable load
[5] Two power resistors for expanding the measuring range
[6] Measuring unit with digital displays for current, voltage, illuminance and module temperature
[7] Reference cell as illuminance sensor

 

Technical Data

 Module design:
- number of cells 36
- cell material: monocrystalline silicon
- module area: 0,64m
Typical module parameters under STC
(Standard Test Conditions)
- max. output: 85W
- short-circuit current: approx. 5,3A
- open-circuit voltage: approx. 22V
Slide resistor: 0...10 Ohm
Two power resistors: 22 Ohm / 50W
Measuring ranges
- temperature: 0100C
- voltage: 0...200V
- current: 0...20A
- illuminance: 0...3kW/m
- tilt: 0...90

 

Dimensions and Weight

LxWxH: 1410x795x1490mm
Weight: approx. 65kg

Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase
Scope of Delivery

1 trainer
1 slide resistor
1 measuring unit
1 set of cables
1 inclinometer
1 set of instructional material

Order Details

061.25000  ET 250  Solar Module Measurements


Print
© 2005 G.U.N.T. Gerätebau GmbH