Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Refrigeration and Air Conditioning Technology  |  ET 420
ET 420 Ice Stores in Refrigeration Show data sheet (pdf file) Print page
ET 420 - A product from the GUNT 2E range
Technical Description

  Ice stores are used in refrigeration to cover an increased additional cooling requirement (peak load). The ice stores are usually charged over night when general energy requirements and energy costs are low.
  To charge and discharge the ice store a circuit with glycol-water mixture is used between the ice store and the compression refrigeration system. When charging the ice store the glycol-water mixture is cooled via a compression refrigeration system to below 0C and thereby withdraws energy from the water in the ice store, causing the water to freeze. During discharging the melting ice withdraws energy from the glycol-water mixture causing the mixture to cool down. During this cooling process the ice store replaces the compression refrigeration system.
  ET 420 also includes a tank for the glycol-water mixture and a dry and wet cooling tower. The glycol-water tank is used as a collection point of the different energy flows: during the evaporation of the refrigerant in the compression refrigeration circuit and during discharging of the ice store, energy is withdrawn from the mixture, whereas during the condensing of the refrigerant energy is added. As required the cooling towers add energy to or withdraw energy from the mixture.
  The record of all required variables enables an energy balance for the individual processes.

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

Learning Objectives / Experiments

- Design and operation of an energy-efficient

  refrigeration system
- Function and operation of an ice store
  * charge
  * discharge
- Energy flow balance
- Energy transport via different media
- Compression refrigeration cycle in the log p-h

  diagram
- Function and operation of a wet cooling tower
- Function and operation of a dry cooling tower

Features

* Industrial refrigeration system with ice store, dry

  cooling tower and wet cooling tower1
* Energy efficiency in refrigeration and air

  conditioning technology

Overview
ET 420 Ice Stores in Refrigeration
Specification

[1] Investigation of the charging and discharging of an ice store

[2] System with ice store, glycol-water tank, compression refrigeration system, dry and wet cooling towers

[3] Refrigeration circuit for R134a with compressor, condenser, evaporator and expansion valve

[4] Glycol-water tank as central receiver and distributor of energy flows

[5] Glycol-water circuit with pump: cooling of the refrigerant condenser, heating of the refrigerant evaporator, charging/discharging of the ice store, operation of the dry cooling tower

[6] Water circuit with pump to operate the wet cooling tower 

[7] Thermometer, manometer, flow meter at all relevant measuring points to balance the processes

  

Technical Data

Compressor, refrigeration capacity: approx. 1,7kW

at -15/32C

Pump, ice store circuit

- max. flow rate: 7m/h
- max. head: 8m
Pumps, wet/dry cooling tower
- max. flow rate: 3,6m/h
- max. head: 10m
Pump, condenser cooling
- max. flow rate: 4m/h
- max. head: 4m
Ice store: 150L
Glycol-water tank: 28L
Wet cooling tower, rated cooling capacity: 12,8kW
Dry cooling tower, rated cooling capacity: 13,8kW
Measuring ranges
- temperature: 4x -20...40C; 7x 0...60C; 

  4x -50...100C
- pressure: 1x -1...9bar; 1x -1...24bar
- flow rate: 3x 106...1000L/h; 1x 15...105L/h;

  1x 395...3995L/h

  

Dimensions and Weight
l x w x h: 1920x800x1800mm (trainer)
l x w x h: 1350x640x1850mm (wet cooling tower)
l x w x h: 1000x920x1110mm (dry cooling tower)
Weight: approx. 522kg (in total)
Required for Operation
230V, 50/60Hz, 1 phase or 230V, 60Hz, 3 phases
Water connection
Scope of Delivery

1 trainer, 1 wet cooling tower, 1 dry cooling tower,

1 set of hoses, 1 packing unit glycol, 1 set of instructional material

Order Details

061.42000  ET 420  Ice Stores in Refrigeration


Print
© 2005 G.U.N.T. Gerätebau GmbH