Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Power Engines and Machines  |  ET 508
ET 508 Simulation of a Two-Stage Air Compressor Show data sheet (pdf file) Print page
Technical Description

  This experimental unit allows variables that affect the process (such as capacity, dead space, flow rate and state of the intake air) to be adjusted from the panel.

  The simulator can model operating states up to the theoretical limits. The significance of the dead space and air re-expansion thus becomes clear.

  The measured values are transmitted directly to a PC via USB. The data acquisition software is included.

Learning Objectives / Experiments
- basic principles of the multistage compression
- special features of a multistage compressor
- thermodynamic state variables
- depiction of a compression process on a T-s
  diagram and on a p-V diagram
- condensation in the intercooler and aftercooler
- on-off pressure control with hysteresis
* Simulated compressor system with intermediate
  cooling and aftercooling
Alternative products
ET 500 -- Two-Stage Piston Compressor
ET 795 -- Simulation of a Gas Turbine

[1] simulated operation of a two-stage compressor system with intermediate cooling and aftercooling
[2]  modification of 9 system parameters using potentiometers
[3] software calculates: intake airflow rate, compressor stroke stage 1+2, pressure ratio stage 1+2, heat transfer at condensation, delivered airflow
[4] LabVIEW software for data acquisition via USB under Windows XP or Windows Vista

Technical Data

9 potentiometers for the setting of
- intake pressure: 0...2bar abs.
- intake temperature: 0...100C
- relative humidity: 0...100%
- coolant flow rate: 0...100kg/h at 15C
- flow control valve setting: 0...100%
- vessel, nominal pressure: 0...50bar
- motor speed: 0...1000min-1
- vessel capacity: 0...1000L
- dead space: 0...100%


Inputs and outputs

- 16x analogue in, 1x analogue out

- 4x digital in/out

Dimensions and Weight
LxWxH: 600x350x480mm
Weight: approx. 15kg
Scope of Delivery

1 experimental unit

1 LabVIEW software CD + USB cable

1 manual

Order Details

061.50800  ET 508  Simulation of a Two-Stage Air 

© 2005 G.U.N.T. Gerätebau GmbH