Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Internal Combustion Engines  |  CT 159  |  CT 153
CT 153 Two-Stroke Petrol Engine for CT 159 Show data sheet (pdf file) Print page
Technical Description

In conjunction with the CT 159 test stand and the HM 365 load unit, the two-stroke petrol engine is highly suitable for use in teaching the fundamentals of engine functioning and measurement.

  The engine used here is an air-cooled single-cylinder two-stroke petrol engine with a membrane carburettor. The engine is started by an electric motor mounted in the HM 365 unit. The air cooling is effected by blades attached to the flywheel. The engine output is dissipated via a centrifugal clutch. The HM 365 load unit is coupled by way of a covered V-belt drive. Because of the high speed this engine is provided with a smaller pulley than other engines in the series.

  The engine includes a sensor to measure the exhaust gas temperature. The sensor, ignition cut-off and fuel supply are connected to the CT 159 test stand.


Learning Objectives / Experiments

In conjunction with CT 159 test stand and HM 365 load unit
- Familiarisation with a four-stroke petrol engine
- Plotting of torque and power curves
- Determination of specific fuel consumption
- Determination of volumetric efficiency and lambda (fuel-air ratio)


* Test engine for use in CT 159 test stand

[1] Air-cooled single-cylinder two-stroke petrol engine for installation in CT 159 test stand
[2] Engine mounted on a base plate with vibration dampers
[3] Force transmission to brake via pulley, gear transmission 2:1 

[4] Engine completely equipped with fuel line, throttle cable and exhaust gas temperature sensor

[5] Fuel hose with self-sealing quick-release coupling


Technical Data

Air-cooled single-cylinder petrol engine
power output: 1kW at 6000rpm
- bore: 41.5mm
- stroke: 32mm
V-belt: D=63mm


Dimensions and Weight
l x w x h: 430 x 355 x 310 mm
Weight: approx. 8 kg
Scope of Delivery
1 engine, complete with all connections and supply lines
1 manual
Order Details

063.15300  CT 153  Two-Stroke Petrol Engine

                     for CT 159

© 2005 G.U.N.T. Gerätebau GmbH