Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Sanitary Systems  |  ST 320
ST 320 Pipe Cleaning Training Panel Show data sheet (pdf file) Print page
Technical Description

The flushing process is intended to remove contaminants, for example the remnants of solder or sealant from the drinking water pipes. The individual pipe circuits must be flushed from bottom to top. It is possible to observe the flushing action by means of transparent pipe sections. Flushing is performed via two lines that are connected to a cold water supply. Contaminants are introduced into the pipe system through openings with shut-off valves.

  Original plumbing components are used in the unit.

 
Learning Objectives / Experiments
- Introducing contaminants into the system
- Limitations of flushing according to technical
  regulations
Features
* Pipe flushing according to DIN 1988 standards1
* Usage of original plumbing components1
* Contaminants can be introduced
Specification
[1] Pipe flushing in accordance with DIN 1988
[2] Cold water connection using hose
[3] Usage of original plumbing components
[4] Contaminants can be introduced into the pipe system via filling openings that can be shut off
[5] Transparent pipe fittings enable optimal observation of the flushing process
[6] Alternative accessories: flushing compressor (not included)
 
Technical Data

Automatic mixer, thermostatic mixer

- recommended flow pressure: 1...5bar

- min. flow rate: 5L/min

- max. water temperature: 80C, with temperature

  safety stop
Two handle mixer
Simulated hot water preparation
Safety fittings

- quick-action bleed valve

- safety valve on the hot water preparation unit
Pipes: Cu / transparent plastic
2x cold water connection: Geka coupling 1
10x hose connection with quick-release coupling

 

Dimensions and Weight
l x w x h: 1900 x 300 x 1300 mm (panel)
Weight: approx. 100 kg (panel)
Required for Operation
Cold water supply min. 3bar
Scope of Delivery

1 trainer

1 set of connecting hoses

1 manual

Order Details
066.32000  ST 320  Pipe Cleaning Training Panel
Print
© 2005 G.U.N.T. Gerätebau GmbH