Home           Products           Company           Contact us     
> Fundamentals of Thermodynamics
> Applied Thermodynamics
> Renewable Energies
> Power Engines and Machines
> Internal Combustion Engines
> Refrigeration and Air Conditioning Technology
> Heating and Ventilation in Buildings
> Sanitary Systems
Products  |  Thermal Engineering and HVAC  |  Sanitary Systems  |  ST 310
ST 310 Drinking Water Installation Demonstrator Show data sheet (pdf file) Print page
Technical Description

A typical household drinking water installation is fitted to the panel. A small electrical boiler for hot water and a circulation pipe with the related components demonstrate the heating of domestic hot water from the cold water supplied.

  Safety devices show how the drinking water pipework is protected against the backflow of waste water.

  A pipe system for draining the waste water is mounted on the back of the panel.

 
Learning Objectives / Experiments

- Function and operation of components
  * water meter
  * pressure reducing valve with and without

    reversible flow filter
  * backflow preventer / system separator
  * system of safety devices
  * pressure vessel with heater
  * circulating pump
  * thermal discharge safety device

Features
* Trainer with all components common in a drinking
  water installation1
* Designed for training in the plumbing sector
Alternative products
ST 210 -- Sanitation Fittings Training Panel
ST 330 -- Protection of Drinking Water Training Panel
Specification
[1] Familiarisation with the most important components in a drinking water installation
[2] System divided into cold water side, hot water side, drain system
[3] Cold water circuit with water meter, pressure reducing valve, angle-seat valve, system separator, outlets
[4] Hot water circuit with system of safety devices, pressure vessel with heater, pressure reducing valve, non-return valve, circulating pump with timer, outlets
[5] Drain system on rear of panel, drain pipe DN 40 with high temperature stability 
[6] Single handle mixer, two handle mixer, shower sprinkler, pipe vents
 
Technical Data

Vane impeller water meter DN20: 2.5m/h
Euro system separator BA, hazard class 4
System of safety devices, 6bar

- backflow preventer

- pressure reducing valve

- shut-off valve
Thermal discharge safety device: 95C
Threaded heater element 3kW (in pressure vessel)
Pump

- power consumption: 20W

- max. flow rate: 640L/h

- max. head: 1,4m

- max. operating temperature: 110C

 
Measuring range

- pressure: 3x 0...10bar

 

Dimensions and Weight
l x w x h: 2000 x 700 x 1900 mm
Weight: approx. 130 kg
Required for Operation

230V, 50Hz, 1 phase
Cold water connection: 1.5bar, drain

Scope of Delivery

1 trainer

1 manual

Order Details

066.31000  ST 310  Drinking Water Installation

                           Demonstrator


Print
© 2005 G.U.N.T. Gerätebau GmbH