Home           Products           Company           Contact us     
> Fundamentals of Control Engineering
> Components and Calibration
> Simple Process Engineering Control Systems
> Complex Process Engineering Control Systems
> Fundamentals of Process Engineering
> Mechanical Process Engineering
> Thermal Process Engineering
> Chemical Process Engineering
> Biological Process Engineering
> Water Treatment
Products  |  Process Engineering  |  Simple Process Engineering Control Systems  |  RT 634
RT 634 Pressure Control Demonstration Unit Show data sheet (pdf file) Print page
Technical Description

  This experimental unit provides a comprehensive experimental introduction to the fundamentals of control engineering using an example of pressure control.

  All components are clearly laid out on a vertical front panel. The large-format process schematic provides an aid to understanding. The controlled system is operated by compressed air, which must be provided by the laboratory. The use of two in-line pressure tanks permits a 2nd order controlled system to be constructed. Disturbances can be generated by alternate air tapping by way of a hand-operated valve. Both pressure tanks are fitted with manometers. A pressure sensor measures the pressure. The controller used is a state-of-the-art digital industrial controller. The actuator in the control loop is an electro-pneumatic control valve. The controlled variable X and the manipulating variable Y can be tapped as analogue signals at lab jacks. This enables external recording equipment, such as a plotter or an oscilloscope, to be connected.

  An instrumentation and control software (RT 650.40) with interface module (USB) is available as an accessory. This enables the key process variables to be represented, and control functions executed.

 

  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

Learning Objectives / Experiments

- fundamentals of control engineering
- latest industrial control engineering components:

  controllers, transducers, actuators
- operation and parameter setting of a multi-

  functional state-of-the-art digital controller: e.g.

  parameter setting as P, PI and PID controller
- investigation of disturbance and control response
- influence of different controller parameters on

  stability and control quality
- investigation of the properties of the open and

  closed control loop
- processing of process variables using external

  equipment, e.g. plotter or oscilloscope
- together with accessory RT 650.40:

  familiarisation with and use of I&C software

Features

* Experimental introduction to control engineering

  using an example of pressure control1
* Construction of the system with components

  commonly used in industry1 
* Digital controller with freely selectable parameters:

  P, I, D and all combinations1
* Optional I&C software RT 650.40 via USB

Available accessories
RT 650.40 -- I&C Software for RT 614 - RT 674 Series
Alternative products
RT 030 -- Training System: Pressure Control, HSI
RT 450.03 -- Controlled System Module: Pressure
RT 532 -- Pressure Control Trainer
RT 614 -- Level Control Demonstration Unit
RT 624 -- Flow Control Demonstration Unit
RT 644 -- Temperature Control Demonstration Unit
RT 674 -- Flow / Level Control Demonstration Unit
Overview
RT 614 - RT 674 Introduction to Industrial Process Control
Specification

[1] experimental unit for control engineering experiments
[2] pressure control of a 2nd order controlled system with 2 pressure tanks
[3] pressure measurement by pressure sensor
[4] generation of disturbance variables by needle valve
[5] 2 Manometers
[6] control valve: electro-pneumatic control valve
[7] digital industrial controller, parameterisable as a P, PI or PID controller
[8] large process schematic on front panel
[9] process variables X and Y accessible as analogue signals via lab jacks

 

Technical Data

Operating pressure: 6bar
Pressure tanks
- capacity: 10L
- pressure: max. 10bar
Pressure sensor: 0...6bar
Manometers: 0...10bar
Electro-pneumatic control valve

- reference variable: 4...20mA

- nominal valve stroke: 6mm
Controller: parameterisable as P, PI or PID controller
Process variables as analogue signals: 0...10V
Connection of external recording devices (e.g. oscilloscope, line recorder) via lab jacks

 

Dimensions and Weight
LxWxH: 1.000x500x1.050mm
Weight: approx. 55kg
Required for Operation
230V, 50/60Hz, 1 phase or 120V, 60Hz, 1 phase
Compressed air connection: 7...10bar
Scope of Delivery

1 experimental unit

1 set of laboratory cables
1 set of instructional material

Order Details

080.63400  RT 634  Pressure Control

                                Demonstration Unit


Print
© 2005 G.U.N.T. Gerätebau GmbH