Home           Products           Company           Contact us     
> Statics
> Strength of Materials
> Dynamics
> Fundamentals of Engineering Design
> Machinery Diagnosis
> Properties of Materials
Products  |  Engineering Mechanics and Machine Elements  |  Properties of Materials  |  WP 510
WP 510 Torsion Testing Machine, 200 Nm, Motor Driven Show data sheet (pdf file) Print page
Technical Description

  The unit is used for torsional testing of different materials to fracture. Test torque and angle of twist are measured. Rods of different length and diameter are used as specimens. The torque is applied using a reduction geared motor. Four different drive velocities (both clockwise and counterclockwise) are realised with the frequency converter. A strain gauge measuring shaft provides the torque as an electrical signal, the angle of twist is recorded by an optoelectronic angular sensor. Both values are displayed digitally, the measurement can also be evaluated on a PC using the software. For adaptation to different length rods, the dolly can be slid. The base plate is reinforced against twisting with square sections. A transparent plastic cover provides protection against flying debris on fracture.

 
Learning Objectives / Experiments

- torsional testing of different materials up to

  specimen fracture

- recording the torque-angle of twist curve

- determination of the elastic range

Features

* Measurement of the test torque with strain gauges1
* Optoelectronic absolute angular sensor1
* 4 different deformation speeds can be set1
* Display of the values on LC display1
* GUNT software for data acquisition

Available accessories
WP 510.01 -- 5 Torsion Test Rods, Steel
WP 510.02 -- 5 Torsion Test Rods, Brass
WP 510.03 -- 5 Torsion Test Rods, Aluminum
Alternative products
WP 500 -- Torsion Tester, 30Nm
Specification

[1] experimental unit for motorised torsion testing of different materials to fracture
[2] max. test torque 200Nm
[3] twisting velocities (clockwise and counterclockwise) 50, 100, 200, 500/min
[4] test rod material steel, aluminium, brass
[5] test rod holder 19mm AF hex socket
[6] test torque measurement using strain gauge measuring shaft
[7] optoelectronic angle sensor
[8] digital measured value indication

[9] worm drive motor, speed controller via frequency converter, 4 fixed speeds

[10] GUNT software for data acquisition via USB under Windows Vista or Windows 7
  

Technical Data

Twisting velocities: 50, 100, 200, 500/min-1
Test rod length: max. 300mm
Test rod holder: hex socket 19mm AF
Frequency converter with 4 fixed speeds
Motor output: 0,12kW, clockwise and counterclockwise

 

Measuring ranges

- torque: 0...199,9Nm

- angle of twist:  0...3200, resolution: 0,1
 

Dimensions and Weight
LxWxH: 1.100x550x450mm
Weight: approx. 110kg
Required for Operation
230V , 50/60Hz, 1 phase or 120V, 60Hz/CSA, 3 phase
Scope of Delivery

1 complete torsion tester
3 sets of test rods

1 GUNT software CD + USB cable
1 manual

Order Details

020.51000  WP 510  Torsion Testing Machine,

                                  200 Nm, Motor Driven


Print
© 2005 G.U.N.T. Gerätebau GmbH