Home           Products           Company           Contact us     
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Products  |  Fluid Mechanics  |  Steady Incompressible Flow  |  HM 240.06
HM 240.06 Heat Transfer Show data sheet (pdf file) Print page
Technical Description


The HM 240.06 Heat Transfer Model, designed as an accessory for the HM 240, is used for the experimental investigation of heat transfer from a heated rod to an air flow. It comprises a rod oven and a copper specimen. The copper rod is heated in the oven to approx. 110C, before it is placed in the HM 240 Computer Linked Air Flow Bench. A temperature sensor is built into the specimen; this is connected to the oven and from there transmits its measured data to the HM 240.01 Data Logging Unit. By measuring the cooling curve in a flow of air, the coefficient of heat transfer can be determined.

Learning Objectives / Experiments
Together with the HM 240 and HM 240.01, the following experiments are possible:
Measuring a cooling curve
Determination of the coefficient of heat transfer from the cooling curve
Forced convection at a heater element in a flow of air
[1] Model for convective heat transfer in a pipe with a flow of air
[2] Rod oven lxwxh 350x250x150mm
[3] Copper specimen with integrated temperature sensor
[4] Heating up to approx. 110C
[5] 230V, ~50Hz
Technical Data
Heater power 100W
Copper rod, length 120mm
Diameter 20mm
Dimensions and Weight
Rod oven lxwxh : 350 x 250 x 150 mm
Weight : approx. 3 kg
Scope of Delivery
1 heat transfer model, 1 instruction manual
Order Details
070.24006 HM 240.06 Heat Transfer
© 2005 G.U.N.T. Gerätebau GmbH