Home           Products           Company           Contact us     
> Fundamentals of Fluid Mechanics
> Steady Incompressible Flow
> Flow around Bodies
> Steady Flow of Compressible Fluids
> Examples of Transient Flow
> Hydraulic Fluid Energy Machines
> Components in Piping Systems and Plant Design
> Fluidic Experimental Plants
> Hydraulics for Civil Engineering
Products  |  Fluid Mechanics  |  Hydraulic Fluid Energy Machines  |  HM 365.32
HM 365.32 Turbine Supply Unit Show data sheet (pdf file) Print page
Technical Description

  Together with HM 365.31, the HM 365.32 supply unit can be used to operate a Pelton or Francis turbine, whose characteristic operating behaviours can then be investigated.
  The separate turbines from HM 365.31 are placed on the working surface of the supply unit and screwed in place. The turbine is connected to the supply unit via a hose. After the water has flowed through the turbine, it flows back into the tank. Thanks to its closed water circuit, the trainer is independent from the mains water supply and can be used in mobile applications. The flow rate and/or the pressure present at the turbine can be adjusted by a flow control valve.
  The supply unit is equipped with sensors for pressure and flow rate. The measured values are displayed digitally. The mechanical turbine output is measured via the HM 365 Universal Drive and Brake Unit, which is also required. The drive unit is used to adjust constant speeds or torques, allowing experiments to be carried out in different operating modes. All measured values are transmitted directly to a PC via USB. The data acquisition software is included. The software for data acquisition and visualisation makes the experiments especially clear and enables fast execution of experiments with reliable results.
  The well-structured instructional material sets out the fundamentals and provides a step-by-step guide through the experiments.

 

 
Learning Objectives / Experiments

In conjunction with HM 365 and a Pelton or Francis turbine from HM 365.31
- determination of the mechanical output of the

  turbines
- determination of the hydraulic output of the turbines
- determine the efficiencies of the turbines
- plot characteristic curves
- influence of the guide vane position on the

  characteristic curve when using the Francis turbine
- influence of the nozzle cross-section on the

  characteristic curve when using the Pelton turbine

 

Features

* Closed water circuit for supplying turbines1 
* Different operating modes can be selected via

  HM 3651 
* GUNT software for data acquisition

Available accessories
HM 365.31 -- Pelton and Francis Turbine
Alternative products
HM 365.10 -- Water Pump Supply Module
HM 365.20 -- Oil Pump Supply Module
Specification
[1] supply unit for turbines from HM 365.31
[2] closed water circuit contains multi-stage centrifugal pump, tank, inductive flowmeter and flow control valve
[3] connection to the turbines via flexible hose with quick-release coupling
[4] drive via HM 365 Universal Drive and Brake Unit
[5] constant torques and speeds can be adjusted via HM 365 
[6] digital display for flow rate, pressure and temperature
[7] braking torque and speed measured in HM 365
[8] GUNT software for data acquisition via USB under Windows Vista or Windows 7
 
Technical Data

Centrifugal pump, 4 stages
- power consumption: 4kW
- max. flow rate: 400L/min
- max. head: 70m
- speed: 2.850min-1
Tank: 96L

 

Measuring ranges
- pressure (turbine inlet): -1...9bar
- pressure (Francis turbine outlet): 0...1,6bar
- temperature: 0...100C
- flow rate: 0...600L/min

 

Dimensions and Weight
LxWxH: 1.300x800x1.200mm
Weight empty: approx. 120kg
Required for Operation
400V, 50Hz, 3 phases or 230V, 60Hz, 3 phases
Scope of Delivery
1 trainer
1 measurement amplifier
1 CD with GUNT software + USB cable
1 hose with quick-release couplings
1 set of instructional material
Order Details
070.36532  HM 365.32  Turbine Supply Unit
Print
© 2005 G.U.N.T. Gerätebau GmbH